Table of Contents
Advertisement
TRENDnet User's Guide
Hardware Installation
Cabling
It's recommended that the wiring the cable in your home or office by a
professional. If you already have the cable deployed, make sure the cable and
the connectors meet the category 5 Ethernet cable standards. At least 2 pairs
of twisted lines are required for power and data. Poor cable quality may cause
unexpected problems. Testing your cable or running a new cable is suggested
for new camera installation.
Waterproof cap
The TV‐IP314PI itself is IP66 grade water and dust proof. There is a set of
network cable water proof caps that comes with the package as well. Run
your cable going through the accessories, and then crimp the cable with an
RJ45 module. Plug in the network cable and then tighten the waterproof cap
to prevent water running into camera through the cable.
© Copyright 2016 TRENDnet. All Rights Reserved.
Mount your camera
Drill the screw holes and the cable hole if necessary with the drill template
comes with the package.
Fix the mounting base on the ceiling or the wall with the screws that come
with the package. Route the cables to the cable hole.
TV‐IP314PI
12
Hide quick links:
Advertisement
Table of Contents
