Activating/Deactivating Music On Hold; Setting The Base's Ip Address In The Lan - Gigaset A510IP Manual

Entering extra codes
¤
§Menu§
Extra Codes
q
§Del§
~
Repeat the steps above until you have entered all the extra codes for your area. You
can save a maximum of five extra codes.
§OK§

Activating/deactivating music on hold

¤
§Menu§
§OK§
Press

Setting the base's IP address in the LAN

Prerequisite: Your base is connected to a router or a PC
An IP address is required in order for the LAN to "recognise" your phone.
The IP address can be assigned to the phone automatically (by the router) or man-
ually.
u
If the address is assigned dynamically, the router's DHCP server automatically
assigns an IP address to the phone. The base's IP address can be changed
according to router settings.
u
With manual/static assignment, you assign a static IP address to the phone. This
may be necessary depending on your network configuration (e.g., if your phone
is connected directly to a PC).
Please note
To assign the IP address dynamically, the DHCP server on the router must be
activated. Please also read the user manual for your router.
¤
§Menu§
~
¤
Ï Settings
Telephony
Select and press
Select an entry ("–––" = empty entry).
Delete a previously entered extra code if necessary.
Enter the extra code (maximum 3 characters, digits and the characters
"*", "#" are permitted).
Press the display key.
¤
Ï Settings
Telephony
to activate or deactivate the music on hold (³ = on).
¤
Ï Settings
System
If the system PIN is not 0000: enter the system PIN and press
§OK§
.
¤
Music on Hold
¤
Local Network
Setting the base
¢
( page 21).
§OK§
.
99