Configuring A Network Mailbox For Fast Access - Gigaset A510IP Manual

Using the network mailbox

Configuring a network mailbox for fast access

With fast access you can dial a network mailbox directly.
Assigning key 1, changing assignment
Fast access settings are handset-specific. You can assign a different network mail-
box to key 1 on each registered handset.
No network mailbox is preconfigured for fast access in the default settings.
1
Or:
¤
§Menu§
The list of VoIP connections and the fixed line connection assigned to the handset
as receive connections is displayed. Net AM : Phone is displayed for the fixed line
and Net AM : IP1 to Net AM : IP6 for the VoIP connections.
s
If a number is already stored for this network mailbox, fast access is activated
immediately.
a
If no number is saved for the network mailbox, you are asked to enter the number
of the network mailbox.
~
§OK§
a
Fast access is activated.
Calling the network mailbox via fast access
1
If you have set a network mailbox for fast access, you are connected directly to this
network mailbox. Handsfree mode is activated.
d
You hear the network mailbox announcement.
Displaying new messages in the handset's idle display
If a new message is present on one of the network mailboxes assigned to the hand-
set via its receive connection, the à icon and the number of new messages are
generally shown on the idle display.
Calling the network mailbox
With the message key
Under the message key f you will find a list for each network mailbox that fulfils
the following prerequisites:
u
The corresponding connections are assigned to the handset as receive connec-
tions.
82
Press and hold key 1.
¤
Ì Voice Mail
Set Key 1
Select entry and press
Press and hold the end call key (idle status).
Enter the number for the network mailbox.
Press the display key.
Press and hold the end call key (idle status).
Press and hold.
If necessary, deactivate handsfree mode.
f
³
§OK§
( = on).