Activating/Deactivating Music On Hold; Setting The Base Station Ringer Tone - Gigaset 2011 Operating Instructions Manual

giga2011.bk : kap09a.fm5 Seite 47 Freitag, Juli 9, 1999 2:26 PM
9.7.99

Activating/deactivating music on hold

m t Service
4 1 1
REDIAL
410
REDIAL

Setting the base station ringer tone

m t Service
kap09a.fm5 Gig 2011 pocket, GBR PTT: A30852-X1101-B657-1-7619
You are connected to an external party who has been
placed on hold while you conduct an internal consultation
or you have activated the mute function. The external par-
ty will hear music while on hold. Music on hold is activat-
ed by default.
( t means: scroll with
Activate the Service menu item.
#1
Start the setting procedure.
d Enter the four-digit base code; (factory default "0000")
(' page 39).
The current setting is displayed after the first digit
SET
1 = activated, 41 0 = deactivated. Music on hold is acti-
vated the next time the digit
fault).
or
Deactivate music on hold.
SET
It is possible to define the tone used to signal calls at the
base station. You can choose from a range of six tones.
The factory default is level 1.
To set the ringer tone, the base station ringer
must be switched on.
It is easier to distinguish between calls signalled
at the base station and the handset if different
ringer tones are set for each. The ringer tone can
also be set for the handset
(' page 49).
( t means: scroll with
Activate the Service menu item.
#*6
Start setting procedure. The selected ringer tone is
sounded. The set tone level is indicated on the display:
:
* 6 1
SET
SET
Enter the applicable digit for the required ringer tone
d
SET
(1 to 6) and save.
Individual base station settings
Z
, confirm with
OK
1
is entered (factory de-
Z
, confirm with
OK
(Example: tone level 1 is
set)
REDIAL
)
1
: 41
)
47