Locating A Handset ("Paging"); Making Internal Calls - Gigaset A510IP Manual

Locating a handset ("paging")

¤
Briefly press the registration/paging button on the base
All registered handsets will ring at the same time ("paging"), even if the ringtones
are switched off.
The current (local) IP address for the base appears in the handset displays.
Ending the search
¤
On the base: Press the registration/paging key briefly, or
¤
On the handset: Press the talk key c or end call key a or the display key
§Silence§
¤
No action: After approx. 30 seconds, the paging call will end automatically.
Please note
u
An incoming external call will not interrupt the paging process.
u
If there are already two internal connections between the handsets, then
paging is not possible.
u
A paging call is also signalled acoustically on handsets where the ringtone is
permanently deactivated.

Making internal calls

If you have multiple handsets registered to the base, you can make internal calls
free of charge.
Calling a specific handset
u
~
Or:
u
s
c
Calling all handsets ("group call")
u
Or:
u
P
Or:
u
Call All
c
All handsets are called.
, or
Initiate internal call.
Enter the number of the handset.
Initiate internal call.
Select handset.
Press the talk key.
Press and hold.
Initiate internal call.
Press the star key.
Initiate internal call.
Select
Press the talk key.
Using multiple handsets
¢
( page 9).
87