Gigaset A510IP Manual page 26

First steps
Launching the installation wizard
1. VoIP wizard – making VoIP settings
You will see the following display:
Before you can use VoIP to phone any other numbers over the Internet, the fixed
line or the mobile network, you need the services of a VoIP provider which supports
the VoIP SIP standard.
Prerequisite: You have registered with a VoIP provider (e.g., via your PC) and set up
at least one VoIP account (IP account).
To use VoIP, you now need to enter the access data for your VoIP account. You will
receive all the necessary data from your VoIP provider. This will include:
Either:
u
Your user name
(if required by the VoIP provider).
This is the user name of your IP account (caller ID), frequently identical to your
phone number.
u
Your authentication name or user ID
u
The (login) password registered with the VoIP provider
u
General settings for your VoIP provider (server addresses etc.)
Or:
u
An auto configuration code (activation code)
Your Gigaset phone's VoIP wizard can help you make these entries.
24
As soon as the handset battery is sufficiently
charged, the message key f on the handset
will flash (approx. 20 minutes after you have
put the handset in the charger).
¤
Press the message key f.
¶
Start IP
assistant?
No Yes