Connecting The Charging Cradle - Gigaset A510IP Manual

First steps

Connecting the charging cradle

2
If you have to remove the plug from the charger again:
¤
Disconnect the power adapter from the mains
power supply.
¤
Then press the release button
the plug 4.
Placing the handset in the charger
¤
Place the handset in the charger with its display facing forward.
Each handset is registered with the base at the factory. You do not need to register
the handsets again. If you wish to use your handset with a different base or use
additional handsets with your base, you have to register the handset manually
¢
page
To charge the batteries, leave the handset in the charger.
Please note
Only place the handset in the charger that is intended for it.
14
and disconnect
3
86.
¤
Connect the flat plug from the
power adapter 1.
¤
Plug the power adapter into the
1
mains power socket 2.
4
3