Electrical System Maintenance; Fuses - Toro workman HDX-D 07368 Operator's Manual

3. Remove the filter canister and clean the mounting
surface.
4. Lubricate the gasket on the filter canister with clean
oil.
5. Install the filter canister by hand until the gasket
contacts mounting surface, then rotate it an
additional 1/2 turn.
6. Tighten the drain plug on the bottom of the filter
canister.
Electrical System
Maintenance

Fuses

The fuses for the machine's electrical system are
located under the center of the dash panel (Figure 50
& Figure 51).
1. Fuses
44
Figure 50
Figure 51