Service Interval Chart - Toro workman HDX-D 07368 Operator's Manual

Table of Contents

Advertisement

Maintenance Service
Interval
Every 800 hours
Every 1,000 hours
Note: Determine the left and right sides of the machine from the normal operating position.
Only qualified and authorized personnel shall be permitted to maintain, repair, adjust, or inspect
the vehicle.
Avoid fire hazards and have fire protection equipment present in the work area. Do not use an open
flame to check level or leakage of fuel, battery electrolyte, or coolant. Do not use open pans of fuel
or flammable cleaning fluids for cleaning parts.
If you leave the key in the ignition switch, someone could accidently start the engine and seriously
injure you or other bystanders.
Remove the key from the ignition before you do any maintenance.

Service Interval Chart

Maintenance Procedure
• Change the front differential oil.
• Change the hydraulic fluid and clean the strainer.
• Replace the hydraulic filter.
• Change the high flow hydraulic oil (TC Models only)
• Change the high flow hydraulic oil filter (TC Models only)
• Change the brake fluid.
• Drain/flush the fuel tank.
• Flush/replace the coolant system fluid.
Figure 32
35

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents