Set The User's Bit - Panasonic P2HD AG-HPG20 Operating Instructions Manual

Recording data on P cards (continued)
Setting the recording time code
(continued)
Specifying the time code (TC PRESET)
(continued)
5
After the time code value has been set,
press .
6
Using , move to "YES", and press
TC PRESET
PRESET OK?
___
YES
NO

Press [MENU/MODE CHK]  times to release
the menu mode.

Set the user's bit

Setting user's bit allows you to store 8-digit
information (such as the date and time) in the
hexadecimal format on the sub code area.
User's bit is automatically saved in the memory
and retained after you turn off the power.
1
Hold down [POWER] for at least 1 second to
turn the power on.

Select "OFF" for the "EXT UB REGEN" item
on the setting menu "TIMECODE SETUP".
• Basic operations on the setting menus (Page
88)

Select "USER" for the "UB MODE" item on
"TIMECODE SETUP".

Select "CHANGE" for the "UB PRESET"
item on "TIMECODE SETUP", and press
TIMECODE SETUP
EXT TC REGEN
TC MODE
TCG
TC PRESET
EXT UB REGEN
UB MODE
UB PRESET
VITC BLANK
PUSH MENU TO RETURN
66
PUSH SET
OFF
DF
REC RUN
>>>
ON
USER
RETURN
CHANGE
5
Set the user's bit.
Using
• You can use numbers from 0 to 9 and letters
from A to F.
0
+/-
.
SEL
PRESET : PUSH SET
Using
and again to select the character.
0
+/-
SEL
PRESET : PUSH SET
If [RESET] is pressed while setting the user's bit,
the user's bit value will be reset to zero.
6
After the user's bit has been set, press

Using
PRESET OK?
YES
NO

Press [MENU/MODE CHK]  times to release
the menu mode.
.
and , select the user's bit characters.
UB PRESET
0 0 0 0 0 0 0
: PUSH /
: PUSH /
, move to the next digit, and press
UB PRESET
0
0 0 0 0 0 0
: PUSH /
: PUSH /
, move to "YES", and press
UB PRESET
___
PUSH SET
.
.