Panasonic P2HD AG-HPG20 Operating Instructions Manual page 102

List of setting menus (continued)
AV OUT SETUP screen (continued)
Item
CC(F1) BLANK
CC(F) BLANK
10
Only when 59.94 Hz has been set
This is used to make ON/OFF setting of the closed caption signal in the first field
output from SD-SDI output and VIDEO output.
BLANK:
Forced blanking
THRU:
Output
<Note>
In recording/recording standby status, the closed caption signals superimposed onto
the input signals are output.
Only when 59.94 Hz has been set
This is used to make ON/OFF setting of the closed caption signal in the second field
output from SD-SDI output and VIDEO output.
BLANK:
Forced blanking
THRU:
Output
<Note>
In recording/recording standby status, the closed caption signals superimposed onto
the input signals are output.
Description of settings
The underlined settings are the factory mode settings.