Panasonic P2HD AG-HPG20 Operating Instructions Manual page 48

Clip management (continued)
Adding the meta-data to clips (continued)
COUNT value
COUNT value is displayed in 4-digit number. COUNT value is added by 1 increment every time a new clip
is generated by P2 card recording after the recording method of "USER CLIP NAME" is set to "TYPE2"
and the clip meta-data is loaded.
■ Resetting the COUNT value
You can reset the COUNT value according to the following operation.
1
Display the thumbnail display screen.

Press [MENU/MODE CHK].

With cross cursor operation, move the cursor to "META DATA"–"PROPERTY"–"USER CLIP
NAME" and press

.