Panasonic P2HD AG-HPG20 Operating Instructions Manual page 36

Thumbnail display (continued)
Names and functions of thumbnail display screen parts (continued)
1
4
1 Display statuses
The types of information which are displayed on
the screen are displayed as follows.
ALL:
SAME FORMAT:
SELECT:
MARKER:
TEXT MEMO:
SLOT n:
PROPERTY:
P/REMAIN:
P/USED:
META DATA:
When you select SDI on the setting menu
"INPUT SELECT" and input a signal into SDI
input connector, input the same signal as the
one set on the setting menu "SYS FORMAT". If
you input a signal with the different format, the
thumbnail display will be distorted also.
6
All clips
Clip whose format is the
same as the system format
Clip selected by the STILL/
SET button
Clip to which the shot mark
has been added
Clip with text memo data
Clip on the P2 card in slot
"n"
Detailed clip information
Media information
(remaining memory)
Media information
(used memory)
meta-data set on this unit
15
 P card slot numbers and hard drive
statuses
1 2
P2 HDD
• P card
The numbers of the P2 card slots
1 2
where P2 cards have not been
(Gray)
inserted are displayed in gray.
The numbers of the P2 card slots
*
1 2
where P2 cards have been inserted
(White)
are displayed in white.
The number of the P2 card slot,
which contains a P2 card with a clip
that has its cursor position recorded,
is displayed in yellow. When a single
*
1 2
clip has been recorded on a multiple
(Yellow)
number of P2 cards, all the slot
numbers of the cards on which the
clip is recorded will be displayed in
yellow.
* The frame is displayed in pink when the inserted
P2 card is in one of the following statuses:
• RUN DOWN CARD (Page 84)
The maximum number of overwrites on the P2
card has been exceeded.
• DIR ENTRY NG CARD (Page 83)
The directory structure on the P2 card is not
supported.
2 7 8 9
10 11 12 13 14
3
5
6