Clip management (continued)
Displaying SD card information
You can display the usage statuses of SD cards on the screen, and check them.
1
Display the thumbnail display screen.
Press [MENU/MODE CHK].
Using
,
and
– "DEVICES" – "SD CARD", and press
The following information is displayed.
SD STANDARD: Whether the SD card has
USED:
BLANK:
TOTAL:
NUMBER OF
CLIPS:
PROTECT:
•
Proxy recording is not possible with this unit.
Press
.
5
Press [MENU/MODE CHK] to exit the
procedure.
56
, select "PROPERTY"
been formatted in compliance
with the SD/SDHC standard is
displayed.
SUPPORTED: The card format
complies with the SD/SDHC
standard.
NOT SUPPORTED: The card
format does not comply with the
SD/SDHC standard.
Used memory [bytes]
Free memory [bytes]
Total memory [bytes]
Number of clips contained on
the SD card when the clips
were copied onto the SD card
with a proxy or P2 camera-
recorder
Write-protect status
.