Outputting Images To An External Monitor For Playback; Setting The Outputs; Adjusting The Output Volume Level During Recording And Playback; Adjusting The Output Volume Level During Variable-Speed Playback - Panasonic P2HD AG-HPG20 Operating Instructions Manual

Outputting images to an external monitor for playback

You can connect an external monitor to the output connector of the unit, output clips to the external monitor
and play them back on the monitor.
AUDIO OUT CH1/
CH2 connectors
CH 1
AUDIO
CH 2

Setting the outputs

1
Hold down [POWER] for at least 1 second to turn the power on.

Press [THUMBNAIL/MODE].
The normal display screen appears.

Press [MENU/MODE CHK].

Using and
5
Using and
6
Press [MENU/MODE CHK] to end the procedure.

Adjusting the output volume level during recording and playback

The volume level of the sound from the speaker or headphone jack can be adjusted by pressing
during recording or playback.
The volume level of the sound from the speaker or headphone jack can be adjusted by pressing [ALT/3]
and when the thumbnail display screen is displayed. Refer to AV OUT SETUP screen on page 99.
• ALT function must be assigned to [ALT/3] on the setting menu "SW MODE" (Page 97).

Adjusting the output volume level during variable-speed playback

The volume level of the sound from the speaker or headphone jack can be adjusted by pressing [ALT/3]
and during variable-speed playback. Refer to AV OUT SETUP screen on page 99.
• ALT function must be assigned to [ALT/3] on the setting menu "SW MODE" (Page 97).
6
HD/SD-SDI
OUT connector
OUTPUT INPUT
VIDEO HD/SD-SDI HD/SD-SDI
DVCPRO/DV
VIDEO OUT connector
This unit
AG -HP G2
0
, select "AV OUT SETUP" setting item, and press
, select the setting, and press
HD/SD-SDI output
Video output/audio output
.
External monitor
.