140
English 5.906-736.0 Rev. 00 (07/15)
Carefully slide the blower unit to the back so that the
branch is pulled out of the rubber cuff.
Lift the blower and put it down horizontally.
Mark the position of the air flap.
1 Screw
2 Screw for locking the air flap
3 Air flap
Unscrew the screw for locking the air flap.
Open 2 screws of the casing top.
1 Air flap
Position the air flap horizontally.
Remove the fastening clips on the girth of the casing
top, remove the cover.
NOTE
If the air flap is in the horizontal position, the adjustment
mechanism points upwards.