Britax TRUFIX Instructions For Installation & Use page 14

HOW TO INSTALL USING SEATBELT
H. Whilst still compressing the restraint in the
seat pull the top tether adjustment strap (C)
to remove any slack but do not tighten so
much that the restraint lifts off the car seat.
Always secure the loose end of the top
tether strap to prevent it hanging out of
the car or being accessible by the child.
I. Roll up the excess strap and store in the
pocket attached to the cover.
EXPLANATION NOTE: This method of installation ensures
good seatbelt tension, even with the child in the seat.
We recommend that as your child grows, you should
periodically check the seatbelt and top tether tension to
ensure that (a) the car seatbelt has not slackened off and
(b) that the restraint is not "hanging" on the top tether strap.
IMPORTANT :
Always ensure that the car seatbelt and top tether strap are firmly restraining the restraint on the
vehicle seat.
ALWAYS ATTACH HOOK AND REMOVE SLACK IN THE TOP TETHER STRAP.
CAUTION:
CHILDREN CAN BE INJURED OR RESTRAINTS AND TOP TETHER STRAP DAMAGED BY
UNSECURED CARGO IN A COLLISION. SECURE OR REMOVE HAZARDOUS CARGO BEFORE
USING THIS CHILD RESTRAINT.
26
Instructions for Installation & Use - Series No. 6100/A/2013
FITTING SUMMARY
A
C
Pull Adjustment Strap FORWARD-FACING
to remove slack
BELT PATH
marked in yellow.
Always roll up
excess strap and
store in the pocket
attached to the
cover.
HOW TO INSTALL USING SEATBELT
Top Tether
Car's Anchor Fitting
Attachment Clip
;
Pull to tighten
seatbelt
Seat belt 'Lock-off'
Child use seat belt path
Hook
FORWARD-FACING
BELT PATH
;
marked in yellow.
IMPORTANT:
Always roll up the excess top tether Adjustment Strap
and store in pocket. Always secure the loose end of the top tether strap to
prevent it hanging out of the car or being accessible by the child.
Instructions for Installation & Use - Series No. 6100/A/2013
Top Tether
Adjustment Strap
Storage
Pocket
27