Britax TRIFIX User Instructions

PRODUCT OVERVIEW
03
04
05
01 02
ISOFIX attachment points (car) Shoulder straps
01 07
ISOFIX insert guides Adjusting button
02 08
Headrest Adjustment strap
03 09
Recline handle
Harness retainer
04 10
ISOFIX unlocking buttons
Harness buckle
05 11
ISOFIX indicators
Shoulder pads
06
12
The child safety seat has been designed, tested and certifi ed according to the requirements of the European
Tested and certifi ed according
Standard for Child Safety Equipment (ECE R 44/04). The test mark E (in a circle) and the certifi cation number
BRITAX RÖMER
to ECE* R 44/04
are located on the orange certifi cation sticker (sticker on the child safety seat).
child safety seat
• This certifi cation will be invalidated if you make any modifi cations to the child safety seat.
Group Body weight
• The TRIFIX child safety seat must only be used to secure your child in the vehicle. It must never be used as a
TRIFIX 1 9 bis 18 kg seat or toy in the home.
*ECE = European Standard for Child safety Equipment

CARE AND MAINTENANCE

Care for the harness buckle
It is vital for the safety of your child that the harness buckle works correctly.
Malfunctions of the harness buckle are usually caused by accumulations of dirt
or foreign bodies:
• The buckle latches are ejected only slowly when the red release button is
pressed.
• The buckle latches will no longer lock home (i.e. they are ejected again if you
try to push them in).
• The buckle latches engage without an audible „click".
• The buckle latches are diffi cult to insert (you feel resistance).
• The buckle only opens if extreme force is applied.
Remedy
wash out the harness buckle so that it functions properly once again:
Cleaning the harness buckle
05
20
22
1. Open the harness buckle 05 (press the red button).
2. Pull the elastic loop over the harness buckle 05 .
2. Open the Velcro fastener on the crotch pad 20 and take off the crotch pad
from the cover.
3. Slide the metal plate 22 which is used to fasten the harness buckle
the seat shell up on its edge through the strap slot 31 .
4. Soak the harness buckle in warm water with dishwashing liquid for at
05
least an hour. Then rinse and dry it thoroughly.
Cleaning
Please be sure to use only genuine Britax/RÖMER replacement seat covers,
as the seat cover is an integral part of the child safety seat which plays an
important role in ensuring that the system works properly. Replacement
seat covers are available from your retailer.
• The child seat must not be used without its cover.
• The cover can be removed and washed with a mild detergent using the
13
14
06
15
07
16
08
09
17
10
11
12
Adjusting ring of the headrest
13
Top Tether
14
User guide compartment
15
Fabric loop
16
ISOFIX locking arms
17
Seat shell
18
washing machine's cycle for delicate items (30 °C). Please observe the
instructions on the washing label of the cover.
• The plastic parts can be cleaned using soapy water. Do not use harsh
cleaning agents (such as solvents).
• The harnesses can be washed in lukewarm soapy water.
Caution: Never remove the buckle latches 21 from the straps.
• The shoulder pads can be washed in lukewarm soapy water.
Removing the cover
03
31
10
1. Press the recline handle upwards and slide the seat shell
10
into the upright position.
2. Loosen the harness straps as far as possible.
3. Open the harness buckle (press the red button).
05
31
20
4. Open the Velcro fastener on the crotch pad .
5. Slide the headrest 03 to its lowest position.
6. Remove the cover of the headrest .
31
7. Open the poppers on the left and right of the rear part of the cover.
8. Fold the rear part of the cover onto the seat surface.
9. Thread the harness straps through the cutout in the cover.
10. Unhook both of the elastic hoops at the rear, upper edge of the seat shell.
05 to
11. Unhook the elastic seam of the cover under the edge of the seat shell.
TIP: Start at the handles on the side and at the upper edge of the seat shell.
12. Pull the cover up and over the bezel of the strap adjuster.
13. Feed out the harness buckle and the end of the strap from the cover.
05
14. Pull the cover upwards a little and then put it with the cutout over the head-
rest .
03
Re-fi tting the Cover:
Simply follow the steps in the opposite order.
Caution: Check that the harness straps are not twisted and that they have
been correctly inserted in the belt slots on the cover.

CARE INSTRUCTIONS

To ensure the full protective effect of the child safety seat:
• In the event of an accident with an impact speed above 10
km/h it is possible that the child safety seat may have been
damaged, but that the damage may not be immediately
obvious. In this case the child safety seat must be replaced.
Please dispose of it properly.
• Regularly check all important parts for damage. Make sure
that the mechanical components in particular are all in per-
fect working order.
• To prevent damage, ensure that the child safety seat does
not become jammed between hard objects (car door, seat
runners etc.).
• Always have the child safety seat checked if it has been da-
maged (e.g. if it is dropped).
18
• Never lubricate or oil parts of the child seat.
Please observe the waste disposal regulations in your country.
Disposal of packaging Container for cardboard
Cover Residual waste, thermal utilisation
Plastic parts In accordance with the labelling in the
designated container
Metal parts Container for metals
Harness straps Container for polyester
Buckle &latch Residual waste

USE IN THE VEHICLE

Please observe the instructions on the use of child restraint systems described in
your vehicle owner's manual.
The seat may be used in all vehicles equipped with the ISOFIX and Top Tether
anchoring systems. Please consult your vehicle owner's manual for information
about the Top Tether anchoring points and the seats which are approved for child
safety seats in the weight class 9-18 kg.
In the direction of travel Yes
Against the direction of travel No 1)
On seats featuring:
ISOFIX attachments (between
05
20
seat surface and backrest) and
Top Tether anchoring points (for
Yes 2)
example on the parcel shelf, on
the fl oor or behind the backrest)
to the rear
18
(Please observe the applicable regulations in your country)
1) Use is permitted on a rearward-facing vehicle seat (e.g. in a van or minibus)
only if the vehicle seat is also approved for use by adults. The seat must not be
positioned anywhere where it is in range of an airbag which is being deployed.
2) If there is a front airbag: Slide the passenger seat a long way back and refer to
any instructions in vehicle owner's manual.
NEXT CHILD SAFETY SEATS
Testing and certifi cation in accordance with ECE R 44/04
BRITAX RÖMER
Child safety seats
Group
KID 2 - 3
KID plus 2 - 3
KIDFIX 2 - 3
KIDFIX SICT 2 - 3
TWO-YEAR WARRANTY
For this child safety seat we offer a 2-year warranty against manufacturing or
material defects. The warranty period is effective from the day of purchase.
The warranty covers only child safety seats which have been handled properly
and which have been sent to us in a clean and proper condition.
The Warranty does not cover:
• natural signs of wear and damage resulting from excessive stress
• damage resulting from inappropriate or improper use
What is covered by the warranty?
Fabrics: All of our fabrics meet very high requirements with regard to colour
fastness when exposed to UV radiation. Nevertheless, all fabrics fade when
exposed to UV radiation. This is not a material defect, but rather a normal sign
of wear which is not covered by the warranty.
Buckle: Buckle malfunctions are often due to accumulations of dirt or foreign
bodies which may stop the buckle from working properly. If this happens, the
buckle can be cleaned, olease follow the procedure described in your user
instructions.
Please contact your retailer immediately in the event of a warranty claim. He or
she will give you the advice and support you need. When processing claims,
product-specifi c depreciation rates will be applied. Please refer to our General
Terms and Conditions which are available from your retailer.
Use, care and maintenance
The child safety seat must be used in accordance with the user instructions.
We point out expressly that only genuine accessories and replacement parts
must be used.
BRITAX EXCELSIOR LIMITED
1 Churchill Way West t: +44 (0) 1264 333343
Andover f: +44 (0) 1264 334146
Hampshire SP10 3UW e: helpline@uk.britaxeurope.com
United Kingdom www.britax.eu
BRITAX RÖMER
Kindersicherheit GmbH t: +49 (0) 731 9345 0
Blaubeurer Straße 71 f: +49 (0) 731 9345 210
D-89077 Ulm e: info@de.britaxeurope.com
Germany www.roemer.eu
9 - 18kg
TRIFIX
User Instructions
Body weight
15 - 36 kg
15 - 36 kg
15 - 36 kg
15 - 36 kg