Britax TRUFIX Instructions For Installation & Use page 12

HOW TO INSTALL USING ISOFIT™
H. Push in the other side of the child restraint into the
insertion guides and engage the ISOFIT connector
("click") on each side.
I. Push the child seat towards the backrest applying a
firm and even pressure on both sides.
J. Pull both sides of the child restraint to check that the
seat is positioned firmly.
IMPORTANT :
The green locking button must now be visible on
both sides.
Pull restraint forward to ensure both lower
attachment connectors are engaged.
22
Instructions for Installation & Use - Series No. 6100/A/2013
HOW TO INSTALL USING ISOFIT™
CAUTION:
CHILDREN CAN BE INJURED OR RESTRAINTS AND TOP TETHER STRAP DAMAGED BY
UNSECURED CARGO IN A COLLISION. SECURE OR REMOVE HAZARDOUS CARGO BEFORE
USING THIS CHILD RESTRAINT.
K. Fit the top tether attachment clip to the car's
anchor fitting as shown. Make sure to remove as
many twists as possible from the top tether strap.
Always attach the hook and
remove slack
L. Tighten the adjustable top tether strap by pulling the
adjustment strap to remove slack as shown, but do
not over-tighten causing the restraint base to lift off the
vehicle seat.
Always secure the loose end of the top
tether strap to prevent it hanging out of the
car or being accessible by the child.
M. Roll up the excess strap and store in the pocket
attached to the cover.
Instructions for Installation & Use - Series No. 6100/A/2013
Top Tether Attachment Clip
Car's Upper
Anchorage Point
Pull Adjustment
Strap to remove
slack
Always roll up
excess strap and
store in the pocket
attached to the
cover.
23