Adjusting The Lcd Monitor - Panasonic SD/HDD SDR-H20 Operating Instructions Manual

Display style
[Y/M/D]
[M/D/Y]
[D/M/Y]
≥ The date and time function are driven by a
built-in lithium battery.
≥ Make sure to check the time before recording.
≥ If the time display becomes [- -], the built-in
lithium battery has run down. Use the following
steps to charge the battery. When you turn on
the power for the first time after charging, a
message asking you to set the date and time
will appear. Select [YES] and set the date and
time.
To recharge the built-in lithium battery
Connect the AC adaptor or attach the battery
to the unit, and the built-in lithium battery will
be recharged. Leave the unit as it is for approx.
24 hours and the battery will save the date and
time for approx. 6 months. (Even if the OFF/
ON switch is set to OFF, the battery is still
being recharged.)
Adjusting the LCD
monitor
Adjusting the brightness and
color level
1
Press the MENU button, then
select [SETUP] # [LCD SET] #
[YES] and press the joystick.
Screen display
2007.DEC.15
DEC.15.2007
15.DEC.2007
MENU
2
Move the joystick up or down to
select the item to be adjusted.
Then, move the joystick left or
right to make the adjustment.
The bar display moves.
[BRIGHTNESS]:
Brightness of the LCD monitor
[COLOR]:
Color level of the LCD monitor
≥ When the LCD monitor is rotated by 180°
towards the lens, the brightness and color level
of the LCD monitor cannot be adjusted.
≥ These settings will not affect the images
actually recorded.
Increasing and decreasing the
brightness of the entire LCD
monitor
Press the POWER LCD PLUS
button.
Setup
POWER LCD
PLUS
37
LSQT1190