LSQT1211(PAL_ENG).book 1 ページ 2007年2月13日 火曜日 午後1時14分 Operating Instructions SD Card/Hard Disk Video Camera SDR-H250EB Model No. SDR-H20EB ≥ The illustration shows SDR-H250. ≥ SDR-H20 does not have a video light. Before use, please read these instructions completely. LSQT1211 A Downloaded From VideoCamera-Manual.com Manuals...
LSQT1211(PAL_ENG).book 2 ページ 2007年2月13日 火曜日 午後1時14分 Dear Customer, We would like to take this opportunity to thank you for purchasing this Panasonic Movie Camera. Please read these Operating Instructions carefully and keep them handy for future reference. Please note that the actual controls and components, menu items, etc. of your Movie Camera may look somewhat different from those shown in the illustrations in these Operating Instructions.
LSQT1211(PAL_ENG).book 3 ページ 2007年2月13日 火曜日 午後1時14分 Information for Your Safety The socket outlet shall be installed near the equipment and easily accessible. WARNING: The mains plug of the power supply cord shall TO REDUCE THE RISK OF FIRE, remain readily operable. ELECTRIC SHOCK OR PRODUCT To completely disconnect this apparatus from DAMAGE, the AC Mains, disconnect the power supply...
Page 4
LSQT1211(PAL_ENG).book 4 ページ 2007年2月13日 火曜日 午後1時14分 Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households) This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling, please take these products to designated collection points,...
Page 5
LSQT1211(PAL_ENG).book 5 ページ 2007年2月13日 火曜日 午後1時14分 ∫ Indemnity concerning recording ≥ Other names of systems and products mentioned in these instructions are usually the content registered trademarks or trademarks of the The manufacturer shall in no event be liable for manufacturers who developed the system or the loss of recordings due to malfunction or product concerned.
LSQT1211(PAL_ENG).book 6 ページ 2007年2月13日 火曜日 午後1時14分 Fade in/fade out function ......45 Contents Soft skin mode ......... 46 Tele macro function (SDR-H250) ..... 47 Caution for AC mains lead ....2 Colour night view function......47 Self-timer recording........48 Information for Your Safety....3 Recording guideline function....
Page 7
Before using with a computer..... 77 What you can do with a computer ....77 Operating environment......78 Installation ..........81 Installing ImageMixer3 for Panasonic ..81 Reading the software help......82 Software uninstallation ......82 Connection and recognition ....82 Connection and recognition procedures...82 About the computer display......83...
LSQT1211(PAL_ENG).book 8 ページ 2007年2月13日 火曜日 午後1時14分 Before using Before using Features ∫ Extended recording! You can record the equivalent of approximately twenty-two 8 cm DVD discs on the 30 GB internal HDD. You can also record motion pictures and still pictures on an SD card. ∫...
Page 9
LSQT1211(PAL_ENG).book 9 ページ 2007年2月13日 火曜日 午後1時14分 Before using ∫ Editing scenes! (l 61, 62) You can create an original video (playlist) by collecting together your favourite scenes recorded on the HDD. ∫ Using with a computer! (l 77) If you use the supplied software, you can create a backup DVD of the scenes recorded on this unit with just one button.
≥ Most major credit and debit cards accepted. AC adaptor ≥ All enquiries transactions and distribution VSK0651B (DE-974GC) facilities are provided directly by Panasonic UK Ltd. DC cable ≥ It couldn’t be simpler! K2GJ2DC00011 or ≥ Also available through our Internet is direct...
LSQT1211(PAL_ENG).book 11 ページ 2007年2月13日 火曜日 午後1時14分 Before using Optional accessories Some optional accessories may not be available in some countries. AC adaptor (VW-AD11EB) Battery pack (lithium/CGR-DU06/640 mAh) (SDR-H20) Battery pack (lithium/CGA-DU07/680 mAh) (SDR-H20) Battery pack (lithium/CGA-DU12/1150 mAh) Battery pack (lithium/CGA-DU14/1360 mAh) Terminal cover Battery pack (lithium/CGA-DU21/2040 mAh) Menu button [MENU] (l 29) DC input terminal [DC/C.C.
Page 12
LSQT1211(PAL_ENG).book 12 ページ 2007年2月13日 火曜日 午後1時14分 Before using 37 Grip belt (l 12) 24 Card slot (l 24) Using grip belt 25 Tripod receptacle (l 13) Adjust the belt length so it fits your hand. 26 Battery release lever [BATTERY] (l 20) Adjust the belt length and the pad 29 30 position.
Page 13
LSQT1211(PAL_ENG).book 13 ページ 2007年2月13日 火曜日 午後1時14分 Before using During recording The removed lens cap can be attached to the Attaching the lens cap (SDR-H20) lens cap fixture. Attach the lens cap to protect the surface of the lens. Pass the end of the lens cap cord through the belt.
LSQT1211(PAL_ENG).book 14 ページ 2007年2月13日 火曜日 午後1時14分 Before using Using the LCD monitor Using the remote control (SDR-H250) You can record the image while viewing it on the LCD monitor. Place your finger on the LCD START/ PHOTO STOP DISPLAY SHOT monitor open part A and pull the DATE/ LCD monitor out in the direction ZOOM...
While pressing the stopper A, pull out the battery holder. WARNING “THE LITHIUM BATTERY IS A CRITICAL COMPONENT (TYPE NUMBER CR2025 MANUFACTURED BY PANASONIC). IT MUST NEVER BE SUBJECTED TO EXCESSIVE HEAT OR DISCHARGE. IT MUST THEREFORE ONLY BE FITTED IN EQUIPMENT DESIGNED SPECIFICALLY FOR ITS USE.
LSQT1211(PAL_ENG).book 16 ページ 2007年2月13日 火曜日 午後1時14分 Before using HDD and SD card This unit can be used for recording motion pictures and still pictures to the internal HDD and an SD card. Concerning the internal HDD and cards that can be used on this unit Internal HDD SDHC...
We recommend using SD cards conforming to Class 2 or higher of the SD Speed Class Rating or the following SD cards made by Panasonic for motion picture recording. (If another kind of SD card is used, the recording may suddenly stop during motion picture recording.)
If the HDD fails, the recorded data cannot be repaired. ∫ Indemnity concerning recorded content Panasonic does not accept any responsibility for damages directly or indirectly due to any type of problems that result in loss of recording or edited content, and does not guarantee any content if recording or editing does not work properly.
Page 19
LSQT1211(PAL_ENG).book 19 ページ 2007年2月13日 火曜日 午後1時14分 Before using ∫ Card access lamp ≥ When this unit accesses the SD card (reading, recording, playback, erasing, etc.), the access lamp lights up. ≥ If the following operations are performed when the access lamp is lit, then the SD card or the recorded data may be damaged or this unit may malfunction.
≥ Battery charging time (l 21) ≥ We recommend using Panasonic batteries. (l 10, 11) ≥ If you use other batteries, we cannot guarantee the quality of this product.
LSQT1211(PAL_ENG).book 21 ページ 2007年2月13日 火曜日 午後1時14分 Setup Charging time and recordable time The times shown in the tables below are for when the temperature is 25 oC and the humidity is 60%. If the temperature is higher or lower than 25 oC, the charging time will become longer. ∫...
Page 22
LSQT1211(PAL_ENG).book 22 ページ 2007年2月13日 火曜日 午後1時14分 Setup SDR-H20: Maximum Battery model Voltage/ Recording Actual recordable continuously number capacity destination time recordable time Supplied battery/ 1 h 35 min 40 min [HDD] CGR-DU06 7.2 V/640 mAh [SD] 1 h 45 min 45 min (optional) 1 h 40 min 45 min...
LSQT1211(PAL_ENG).book 23 ページ 2007年2月13日 火曜日 午後1時14分 Setup Connecting to the AC outlet How to turn on the power Set the OFF/ON switch to ON. The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always “live” as long as the AC adaptor is connected to an electrical outlet.
LSQT1211(PAL_ENG).book 24 ページ 2007年2月13日 火曜日 午後1時14分 Setup ∫ To turn on the power ≥ Check that the status indicator has gone off. Open the LCD monitor. Open the LCD monitor and then slide the card slot open lever A to open the card slot cover. The status indicator lights and the power turns ∫...
LSQT1211(PAL_ENG).book 25 ページ 2007年2月13日 火曜日 午後1時14分 Setup Securely close the card slot How to use the joystick cover. This unit has a joystick for selecting functions, performing operations, etc. so it is easy to operate this unit with one hand. Basic operations Operations on the menu screen and selection of files on the thumbnail view screen, etc.
Page 26
LSQT1211(PAL_ENG).book 26 ページ 2007年2月13日 火曜日 午後1時14分 Setup Move the joystick up, left or right to select an item. Operations during playback ¬ Rotate the mode dial to select Move the joystick up, down, left or right to select the scene to be played back and press the joystick.
Page 27
LSQT1211(PAL_ENG).book 27 ページ 2007年2月13日 火曜日 午後1時14分 Setup About the operation icons displayed in each mode About auto mode and manual mode (l 35) Video recording mode 1/2 1/2 NEXT 1/2 NEXT NEXT 2/2 2/2 NEXT 2/2 NEXT NEXT 3/3 3/3 NEXT 3/3 NEXT NEXT 4/4 4/4 NEXT 4/4 NEXT...
Page 28
LSQT1211(PAL_ENG).book 28 ページ 2007年2月13日 火曜日 午後1時14分 Setup Picture recording mode 1/2 1/2 NEXT 1/2 NEXT NEXT 2/2 2/2 NEXT 2/2 NEXT NEXT 3/3 3/3 NEXT 3/3 NEXT NEXT 4/4 4/4 NEXT 4/4 NEXT NEXT Icon Direction Function Page Backlight compensation Ø Self timer (1/2) Help mode Soft skin mode...
LSQT1211(PAL_ENG).book 29 ページ 2007年2月13日 火曜日 午後1時14分 Setup ∫ Help mode ≥ When the help mode is used, functions cannot The help mode explains the operation icons that be set. are displayed when the AUTO/MANUAL/FOCUS ≥ When the help mode is used, motion pictures switch is set to AUTO in video/picture recording and still pictures cannot be recorded.
Page 30
LSQT1211(PAL_ENG).book 30 ページ 2007年2月13日 火曜日 午後1時14分 Setup Move the joystick up or down in ≥ Do not switch the mode dial when the menu is displayed. order to select the desired item. Move the joystick up or down in order to select the desired top menu.
LSQT1211(PAL_ENG).book 31 ページ 2007年2月13日 火曜日 午後1時14分 Setup Select a menu item. Move the joystick left or right to select the item to be set. Then, move the joystick up or down to MENU set the desired value. ENTER ≥ Use the direction buttons (3,4,2,1) and ENTER button in place of the joystick on the main unit.
THE LITHIUM BATTERY IN THIS EQUIPMENT MUST ONLY BE REPLACED BY QUALIFIED PERSONNEL. WHEN NECESSARY, CONTACT YOUR LOCAL The bar display moves. PANASONIC SUPPLIER. [BRIGHTNESS]: Brightness of the LCD monitor [COLOUR]: Colour level of the LCD monitor ≥ When the LCD monitor is rotated by 180°...
Page 33
LSQT1211(PAL_ENG).book 33 ページ 2007年2月13日 火曜日 午後1時14分 Setup Increasing and decreasing the brightness of the entire LCD monitor Press the POWER LCD PLUS button. POWER LCD PLUS Each time you press the button: 1 Original brightness 2 Bright 3 Brighter 4 Darker 5 Dark ≥...
LSQT1211(PAL_ENG).book 34 ページ 2007年2月13日 火曜日 午後1時14分 Recording Recording Before recording Basic camera positioning 1 Hold the camera with both hands. 2 Put your hand through the grip belt. 3 Do not cover the microphones or sensors with your hands. 4 Keep your arms near your body. 5 Slightly open your legs.
Page 35
LSQT1211(PAL_ENG).book 35 ページ 2007年2月13日 火曜日 午後1時14分 Recording ∫ About auto mode Set the AUTO/MANUAL/FOCUS switch to AUTO, and colour balance (white balance) and focusing will be adjusted automatically. jAuto white balance (l 106) jAuto focusing (l 107) Depending on the brightness of the subject etc., the aperture and shutter speed are automatically adjusted for optimum brightness.
LSQT1211(PAL_ENG).book 36 ページ 2007年2月13日 火曜日 午後1時14分 Recording Recording motion pictures [HDD] [SD] This unit can be used for recording motion pictures to the internal HDD and an SD card. (l 16) Before recording, use the menu to select the recording destination. (l below) When the unit is turned on for the first time, the media select screen for recording motion pictures will appear.
Page 37
LSQT1211(PAL_ENG).book 37 ページ 2007年2月13日 火曜日 午後1時14分 Recording To end the recording Press the recording start/stop button again to pause recording. ≥ [¥] and [;] are red during recording. Do not move this unit until [;] is green. The images recorded between pressing the recording start/stop button to start recording and pressing it again to pause recording become one scene.
LSQT1211(PAL_ENG).book 38 ページ 2007年2月13日 火曜日 午後1時14分 Recording Recording modes and recordable time available for the motion picture Changing the recording mode of the motion picture. Press the MENU button, then select [BASIC] # [REC MODE] # desired item and press the joystick. MENU ≥...
LSQT1211(PAL_ENG).book 39 ページ 2007年2月13日 火曜日 午後1時14分 Recording Recording still pictures [HDD] [SD] This unit can be used for recording still pictures to the internal HDD and an SD card. (l 16) Before recording, use the menu to select the recording destination. (l below) When the unit is turned on for the first time, the media select screen for recording still pictures will appear.
Page 40
LSQT1211(PAL_ENG).book 40 ページ 2007年2月13日 火曜日 午後1時14分 Recording A Focus indication ± (The white lamp flashes.): Focusing ¥ (The green lamp lights up.): When in focus No mark: When focusing is unsuccessful. ≥ The focus indication is indicated as follows when the Photoshot button [ ] is not pressed halfway.
Page 41
LSQT1211(PAL_ENG).book 41 ページ 2007年2月13日 火曜日 午後1時14分 Recording Screen indications in picture recording mode A Size of still pictures B Selected recording destination C Remaining number of still pictures R 12345 R 12345 R 12345 (Flashes in red when [R 0] appears.) D Quality of still pictures ∫...
LSQT1211(PAL_ENG).book 42 ページ 2007年2月13日 火曜日 午後1時14分 Recording Number of pixels and picture quality for still picture recording ∫ [PICTURE SIZE] Changing the recording size. Press the MENU button, then select [BASIC] # [PICTURE SIZE] # desired item and press the joystick. MENU SDR-H250: Icon Aspect...
LSQT1211(PAL_ENG).book 43 ページ 2007年2月13日 火曜日 午後1時14分 Recording Various recording (SDR-H250)/2 cm (SDR-H20) away from the lens. (Macro function) functions ≥ The zoom speed varies depending on the range over which the zoom lever is moved. (The zoom speed does not vary when Zoom in/out function operating with the remote control.) ≥...
LSQT1211(PAL_ENG).book 44 ページ 2007年2月13日 火曜日 午後1時14分 Recording ≥ This function cannot be used in picture ≥ When the LCD monitor is rotated towards the recording mode. lens side, the icon will not be displayed even if you press the joystick. To use the zoom microphone ≥...
LSQT1211(PAL_ENG).book 45 ページ 2007年2月13日 火曜日 午後1時14分 Recording Press the joystick. Then move ≥ Video recording mode the joystick down to display the icon shown in the illustration. ≥ Picture recording mode 1/2 1/2 NEXT 1/2 NEXT NEXT Move the joystick up to select [ª].
LSQT1211(PAL_ENG).book 46 ページ 2007年2月13日 火曜日 午後1時14分 Recording Move the joystick left to select Press the MENU button, then select [ADVANCED] # [FADE COLOUR] # [WHITE] or [BLACK] and press the joystick. ≥ If you turn off the power, the fade function is cancelled.
LSQT1211(PAL_ENG).book 47 ページ 2007年2月13日 火曜日 午後1時14分 Recording ≥ If the background or anything else in the scene ≥ If a sharper focus cannot be achieved, adjust has colours similar to the skin colour, they will the focus manually. (l 51) also be smoothed. ≥...
LSQT1211(PAL_ENG).book 48 ページ 2007年2月13日 火曜日 午後1時14分 Recording To cancel the colour night view function is focused when the button is pressed halfway. (SDR-H250) Select [ ] again. ≥ When you press the Photoshot button [ fully in auto focus mode, the subject is focused ≥...
LSQT1211(PAL_ENG).book 49 ページ 2007年2月13日 火曜日 午後1時14分 Recording Press the MENU button, then select [ADVANCED] # [O.I.S.] # [ON] and Wide mode press the joystick. This is for selecting the screen’s aspect ratio when recording motion pictures. [HDD] [SD] MENU This allows you to record images compatible with wide-screen TVs (16:9) and regular TVs (4:3).
LSQT1211(PAL_ENG).book 50 ページ 2007年2月13日 火曜日 午後1時14分 Recording Press the MENU button, then select Set the AUTO/MANUAL/FOCUS [ADVANCED] # [WIND CUT] # [ON] switch to MANUAL. and press the joystick. MENU Press the MENU button, then select [BASIC] # [SCENE MODE] To cancel the wind noise reduction # desired item and press the function joystick.
LSQT1211(PAL_ENG).book 51 ページ 2007年2月13日 火曜日 午後1時14分 Recording Move the switch down and set it ≥ During normal playback, the image movement may not look smooth. to FOCUS position. ≥ Avoid recording under fluorescent light, mercury light or sodium light because the colour and brightness of the playback image may change.
Page 52
LSQT1211(PAL_ENG).book 52 ページ 2007年2月13日 火曜日 午後1時14分 Recording Set the AUTO/MANUAL/FOCUS switch to MANUAL. To set the white balance manually Select [ ], and fill the screen with a white subject. 3/3 3/3 NEXT 3/3 NEXT NEXT The icon shown in the illustration is displayed automatically.
LSQT1211(PAL_ENG).book 53 ページ 2007年2月13日 火曜日 午後1時14分 Recording Set the AUTO/MANUAL/FOCUS will temporarily be black. (The black balance cannot be adjusted manually.) switch to MANUAL. 1 Black balance adjustment in progress. 3/3 3/3 NEXT 3/3 NEXT NEXT (Flashes.) The icon shown in the illustration is displayed 2 White balance adjustment in progress.
Page 54
LSQT1211(PAL_ENG).book 54 ページ 2007年2月13日 火曜日 午後1時14分 Recording ≥ When setting both the shutter speed and the iris/gain value, set the shutter speed and then set the iris/gain value. ∫ Manual shutter speed adjustment ≥ Avoid recording under fluorescent light, mercury light or sodium light because the colour and brightness of the playback image may change.
LSQT1211(PAL_ENG).book 55 ページ 2007年2月13日 火曜日 午後1時14分 Playback Playback Motion picture playback [HDD] [SD] Play back the motion pictures recorded on the internal HDD or SD card. Use the menu to select the desired playback medium. (l below) Rotate the mode dial to select Press the MENU button, then select [MEDIA SELECT] # [HDD] or [SD CARD] to select the desired medium and press the joystick.
Page 56
LSQT1211(PAL_ENG).book 56 ページ 2007年2月13日 火曜日 午後1時14分 Playback ≥ When the amount of time recorded on the scene is short, playback may not be possible. ≥ When a scene is displayed as [ ] on the thumbnail display, playback is not possible. ≥ The power will not turn off when the LCD monitor is closed. ≥...
LSQT1211(PAL_ENG).book 57 ページ 2007年2月13日 火曜日 午後1時14分 Playback ∫ Operating with the remote control (SDR-H250) Press the E or D button. SEARCH PLAY SEARCH PAUSE STILL ADV STILL ADV SKIP STOP SKIP Frame-by-frame playback The motion picture is advanced one frame at a time. Move the joystick up during playback to pause the playback.
LSQT1211(PAL_ENG).book 58 ページ 2007年2月13日 火曜日 午後1時14分 Playback Scenes recorded on the same day can be played back in succession. Press the MENU button, then select [PLAY SETUP] # [PLAY MODE] # [BY DATE] and press the joystick. MENU The [VIEW BY DATE] screen is displayed by month when playing back motion pictures on the HDD.
LSQT1211(PAL_ENG).book 59 ページ 2007年2月13日 火曜日 午後1時14分 Playback Still picture playback [HDD] [SD] Play back the still pictures recorded on the internal HDD or SD card. Use the menu to select the desired playback medium. (l below) Rotate the mode dial to select Press the MENU button, then select [MEDIA SELECT] # [HDD] or [SD CARD] to select the desired medium and press the joystick.
Page 60
LSQT1211(PAL_ENG).book 60 ページ 2007年2月13日 火曜日 午後1時14分 Playback ≥ The file format supported by this unit is JPEG. (Not all JPEG formatted files will be played back.) ≥ If a non-standard file is played back, the folder/file number may not be displayed. ≥ This unit may degrade or not play back data recorded or created on another product and another product may degrade or not play back data recorded on this unit.
LSQT1211(PAL_ENG).book 61 ページ 2007年2月13日 火曜日 午後1時14分 Editing Press the button in the Editing Editing scenes thumbnail display. Deleting scenes This is for deleting motion picture scenes. [HDD] [SD] The deleted scenes cannot be restored. Select [ALL] or [SELECT] and Deleting scenes one at a time press the joystick.
LSQT1211(PAL_ENG).book 62 ページ 2007年2月13日 火曜日 午後1時14分 Editing SET] # [YES] and press the To cancel deleting halfway Press the MENU button. joystick. ≥ Scenes are deleted from the last scene on the thumbnail display. The scenes that have already been deleted when the deletion is cancelled cannot be restored.
LSQT1211(PAL_ENG).book 63 ページ 2007年2月13日 火曜日 午後1時14分 Editing [PLAYLIST] # [CREATE] and ≥ If you create or delete playlists, the original scenes will not be modified. Editing scenes on press the joystick. a playlist will not affect the original scenes. MENU Select the scene to be added to the playlist, then press the joystick.
LSQT1211(PAL_ENG).book 64 ページ 2007年2月13日 火曜日 午後1時14分 Editing Playing back a playlist Editing a playlist [HDD] [HDD] ¬ Rotate the mode dial to select Editing scenes on a playlist will not affect the original scenes. ¬ Select [HDD] in [MEDIA SELECT]. Press the MENU button, then Adding scenes to playlist select [PLAY SETUP] # [PLAYLIST] # [VIEW LIST] and...
Page 65
LSQT1211(PAL_ENG).book 65 ページ 2007年2月13日 火曜日 午後1時14分 Editing To continue moving other scenes in the The thumbnail view screen of the playlist that scenes were added to is displayed. playlist Repeat steps 2-3. To continue adding scenes to the playlist To complete editing Repeat steps 1-4.
LSQT1211(PAL_ENG).book 66 ページ 2007年2月13日 火曜日 午後1時14分 Editing Select [ALL] or [SELECT] and ≥ When a playlist is deleted, the number of each subsequent playlist decreases by one. press the joystick. ≥ When [ALL] is selected, the selected playlist will be erased. Proceed to step 5. Editing still pictures (Only when [SELECT] is selected in step 2) Select the scene to be deleted,...
LSQT1211(PAL_ENG).book 67 ページ 2007年2月13日 火曜日 午後1時14分 Editing Press the button in the been deleted when the deletion is cancelled cannot be restored. thumbnail display. To complete editing Press the MENU button. ∫ Deleting still picture files recorded on an SD card by other products A still picture file (other than JPEG) that cannot be played back on this unit may be erased.
LSQT1211(PAL_ENG).book 68 ページ 2007年2月13日 火曜日 午後1時14分 Editing [DPOF SET] # [SET] and press Press the MENU button, then select [PHOTO SETUP] # [LOCK the joystick. SET] # [YES] and press the joystick. MENU MENU Select the file to be set, then press the joystick. Select the file to be protected, then press the joystick.
LSQT1211(PAL_ENG).book 69 ページ 2007年2月13日 火曜日 午後1時14分 Editing (Only when [SELECT] is selected in step 2) ≥ The DPOF setting can be established for up to Select the file to be copied, then 999 files. press the joystick. ≥ DPOF setting made on other devices may not be recognised by this unit.
LSQT1211(PAL_ENG).book 70 ページ 2007年2月13日 火曜日 午後1時14分 HDD and card management Press the MENU button, then select HDD and card management HDD management [SETUP] # [HDD STATUS] # [YES] and press the joystick. Formatting HDD This is for initializing HDD. [HDD] MENU Please be aware that if the HDD is formatted, then all the data recorded on the HDD will be erased.
Page 71
LSQT1211(PAL_ENG).book 71 ページ 2007年2月13日 火曜日 午後1時14分 HDD and card management When the confirmation message appears, select [YES], then press the joystick. ≥ When formatting is complete, press the MENU button to exit the message screen. ≥ Use this unit to format SD cards. If an SD card is formatted on other products (such as a computer), the time spent for recording may become longer and you may not be able to use...
LSQT1211(PAL_ENG).book 72 ページ 2007年2月13日 火曜日 午後1時14分 With other products Change the input channel on the With other products With a TV ≥ The channel set will differ depending on the terminal to which the unit is connected. Playback on TV Start playback on this unit. [HDD] [SD] The image and audio are output on the TV.
LSQT1211(PAL_ENG).book 73 ページ 2007年2月13日 火曜日 午後1時14分 With other products Example of images with a 16:9 aspect ratio on the HDD of this unit, connect this unit and the a regular TV (4:3) DVD recorder with the AV/S cable (supplied) and then dub. below) [TV ASPECT] setting Insert the SD card into the SD card...
LSQT1211(PAL_ENG).book 74 ページ 2007年2月13日 火曜日 午後1時14分 With other products Connect this unit and a video To stop dubbing Stop recording on the connected device. device. Then stop playback on this unit. ≥ If the date and time display and function S VIDEO IN indication are unnecessary, cancel them VIDEO IN before dubbing.
Page 75
LSQT1211(PAL_ENG).book 75 ページ 2007年2月13日 火曜日 午後1時14分 With other products Select a file to be printed, then [A4]: A4 size ≥ You cannot set paper sizes not supported on press the joystick. the printer. Select the layout setting on [PAGE LAYOUT]. The number of pictures set is displayed. Move the joystick up or down to select the desired number of prints, then press the joystick.
Page 76
LSQT1211(PAL_ENG).book 76 ページ 2007年2月13日 火曜日 午後1時14分 With other products ≥ You may not be able to print still pictures recorded with other products. ≥ When the unit is connected directly to the printer, the DPOF settings cannot be used. ≥ Connect the printer directly to this unit. Do not use a USB hub.
Before using with a computer What you can do with a computer When you have installed ImageMixer3 for Panasonic from the supplied CD-ROM and connected your computer to the unit, you can perform the operations described below. A You can play back the images recorded by this unit on your computer or import the images to your computer.
English, French, Spanish, German, Italian and Simplified Chinese supported ≥ You cannot use a Panasonic DVD Video Camera as a device for writing. ≥ Even if the system requirements mentioned in these operating instructions are fulfilled, some computers cannot be used.
LSQT1211(PAL_ENG).book 79 ページ 2007年2月13日 火曜日 午後1時14分 With a computer ≥ Depending upon the environment of your computer, if it does not support Hi-Speed USB (USB 2.0), for example, frame dropout may occur, the audio may be intermittent, or the software may run slowly when you play back recorded images.
Page 80
For technical inquiries about this software, contact the PIXELA Customer Support Center in your region. UK, Germany, France and Spain: (Toll-Free) +800-1532-4865 Other Countries: +44-1489-564-764 Languages supported: English, German, French, Spanish Website: http://www.pixela.co.jp/oem/panasonic/e/index.html (This website is in English only.) LSQT1211 Downloaded From VideoCamera-Manual.com Manuals...
≥ You cannot install the application if you check [I computer while the software is being installed. do not accept the terms of the license agreement]. Installing ImageMixer3 for Panasonic Select where the application is to be installed, and click [Next]. Insert the CD-ROM into the computer.
LSQT1211(PAL_ENG).book 82 ページ 2007年2月13日 火曜日 午後1時14分 With a computer Select [ImageMixer3], then click [Remove]. The computer must be rebooted for the application to work. ≥ Depending on the operating environment, you may be required to install DirectX 9.0c. If so, click [Yes], and install it. If you install the software in a computer that is not compatible with DirectX 9.0c, the computer ≥...
LSQT1211(PAL_ENG).book 83 ページ 2007年2月13日 火曜日 午後1時14分 With a computer Connect this unit and a ≥ This unit supports only the readout of data using the computer. The computer cannot write computer. data to the unit, or erase data from the unit. ≥ Depending on the operating environment of the computer, the shape of the drive icon and the drive name (Example: E:) will differ.
LSQT1211(PAL_ENG).book 84 ページ 2007年2月13日 火曜日 午後1時14分 With a computer Cam USB Device] is selected and SD card click [OK]. Click [Close], and you can safely disconnect the cable. ≥ If you disconnect the USB cable while the ACCESS/PC lamp or card access lamp is on or while appears on the LCD monitor, it may damage the data.
DVD disc again when a different user account is used. Insert a DVD disc into the DVD ≥ You cannot use a Panasonic DVD Video drive. Camera as a device for writing. ≥ It is recommended that you use a brand-new DVD disc.
Page 86
Select [start] # ≥ Imported images can be checked by clicking [All Programs (Programs)] # [Library]. [PIXELA] # [ImageMixer3 for Panasonic] # [ImageMixer3 for ≥ Imported images can be edited using Panasonic]. ImageMixer3. For details, refer to software help. (l 82) ≥...
[All Programs (Programs)] # Creating DVD-Video discs [PIXELA] # [ImageMixer3 for with the selected images Panasonic] # [ImageMixer3 for Panasonic]. Use ImageMixer3 to import the images recorded by this unit that you want to write to a DVD disc and then create a DVD-Video.
Page 88
≥ Depending on the amount of data, writing to the disc may take time. ≥ You cannot use a Panasonic DVD Video Camera as a device for writing. Click [Source], and add the scene to the menu screen by drag and drop.
Page 91
LSQT1211(PAL_ENG).book 91 ページ 2007年2月13日 火曜日 午後1時14分 Others ≥ In the following cases, the unit may not turn off During motion picture recording (in orange) even when you set this to [5 MINUTES]. During playback and while connected to a jWhen using the AC adaptor computer, a printer, etc.
LSQT1211(PAL_ENG).book 92 ページ 2007年2月13日 火曜日 午後1時14分 Others Indications Soft skin mode Tele macro (SDR-H250) Fade (White), Fade (Black) Indications Colour night view function ∫ Media indications Video light (SDR-H250) Zoom microphone HDD is selected ZOOM Wind noise reduction SD card is selected Power LCD plus function ∫...
Page 93
LSQT1211(PAL_ENG).book 93 ページ 2007年2月13日 火曜日 午後1時14分 Others ∫ Playback indications Locked motion pictures and Motion picture playback still pictures Number of recording pixels for still pictures SDR-H250: 2048k1512 1920k1080 1280k960 Still picture playback 640k480 SDR-H20: 640k480 640k360 The picture size is not displayed for still pictures recorded with other products that have different picture sizes from the sizes shown above.
RECORDING IS STOPPED. to a computer, etc. before formatting the SD card. ≥ When using any other card Use a Panasonic SD card or another SD card which can be used to record motion pictures. (l 17) CANNOT RECORD IN AGS The AGS function is activated.
LSQT1211(PAL_ENG).book 95 ページ 2007年2月13日 火曜日 午後1時14分 Others CHANGE TO MANUAL MODE. CANCEL NIGHT VIEW You are attempting to use a function that cannot be used MODE. simultaneously. TURN OFF THE VIDEO LIGHT. OPERATION FAILED. EXCESSIVE SHOCK The unit has detected that it is being dropped so the operation has DETECTED.
LSQT1211(PAL_ENG).book 96 ページ 2007年2月13日 火曜日 午後1時14分 Others Functions that cannot be used simultaneously Some functions in this unit are disabled or cannot be selected due to the unit’s specifications. The table below shows examples of functions restricted by various conditions. Conditions which Functions disable the functions Digital zoom...
LSQT1211(PAL_ENG).book 97 ページ 2007年2月13日 火曜日 午後1時14分 Others Frequently asked questions What kind of cards can be used on this unit? SD Memory Cards and SDHC Memory Cards can be used. (l 16) Can motion pictures be recorded on an SD card? Yes, they can be recorded. To record motion pictures, we recommend using SD cards from 256 MB to 4 GB that conform to Class 2 or higher of the SD Speed Class Rating.
Page 98
LSQT1211(PAL_ENG).book 98 ページ 2007年2月13日 火曜日 午後1時14分 Others Can I write data from a computer onto the unit’s HDD or SD card? No, you cannot. This unit’s USB terminal is read only. Is playback possible on a computer? Use ImageMixer3. Is editing possible on a computer? Use ImageMixer3.
LSQT1211(PAL_ENG).book 99 ページ 2007年2月13日 火曜日 午後1時14分 Others Troubleshooting Problem Check points ≥ Is the battery fully charged? # Charge the battery using the AC adaptor. (l 20) This unit cannot be ≥ The battery protection circuit may have operated. Attach the turned on. battery to the AC adaptor for 5 to 10 seconds.
Page 100
LSQT1211(PAL_ENG).book 100 ページ 2007年2月13日 火曜日 午後1時14分 Others Problem Check points The remote control does ≥ Has the button-type battery of the remote control run out? not function. # Replace it with a new button-type battery. (l 14) A function indication such as the remaining ≥...
Page 101
LSQT1211(PAL_ENG).book 101 ページ 2007年2月13日 火曜日 午後1時14分 Others Problem Check points ≥ Are you trying to record small or finely detailed objects with [PICT. QUALITY] set at [ # If you try to record small or finely detailed objects with Recorded still pictures are not clear.
Page 102
LSQT1211(PAL_ENG).book 102 ページ 2007年2月13日 火曜日 午後1時14分 Others Problem Check points ≥ Is this unit connected to a computer? # No operation can be performed on this unit when it is connected The indication to a computer. disappears. ≥ Turn off the power to this unit. If the power cannot be turned The screen is frozen.
Page 103
≥ To create DVD-Video discs using the DVD COPY function, you need to install ImageMixer3 for Panasonic from the supplied The DVD COPY function CD-ROM to your computer. (l 81) will not start even when I ≥...
LSQT1211(PAL_ENG).book 104 ページ 2007年2月13日 火曜日 午後1時14分 Others Cautions for use Do not spray insecticides or volatile chemicals onto the unit. ≥ If the unit is sprayed with such chemicals, its body may be marred and the surface finish About this unit may peel off. ≥...
LSQT1211(PAL_ENG).book 105 ページ 2007年2月13日 火曜日 午後1時14分 Others ≥ When storing the unit in a cupboard or cabinet, ≥ When you travel, do not forget to bring an AC it is recommended that you place a desiccant adaptor so that you can recharge the batteries (silica gel) in with it.
LSQT1211(PAL_ENG).book 106 ページ 2007年2月13日 火曜日 午後1時14分 Others ≥ During prolonged use, the unit’s surfaces and may not work properly. Make every effort to the SD card will heat up slightly. This is normal. ensure that condensation does not form. If it does form, take the actions described below. When inserting or removing the SD card, Causes of condensation always set the OFF/ON switch to OFF.
LSQT1211(PAL_ENG).book 107 ページ 2007年2月13日 火曜日 午後1時14分 Others This is called automatic white balance White balance adjustment determines the white adjustment. colour under different light sources. By However, since the unit only stores white colour recognising which is the white colour under information under certain light sources, sunlight and which is the white colour under a automatic white balance adjustment does not fluorescent light, the unit can adjust the balance...
Page 108
LSQT1211(PAL_ENG).book 108 ページ 2007年2月13日 火曜日 午後1時14分 Others recorded. The focus may become blurry when recording subjects at the beach, at night views or in scenes involving fireworks or special lights. Recording a subject in dark surroundings The unit cannot focus correctly because the light information that comes through the lens decreases considerably.
LSQT1211(PAL_ENG).book 109 ページ 2007年2月13日 火曜日 午後1時14分 Others Specifications SD Card/Hard Disk Video Camera Information for your safety Power source: DC 7.9 V/7.2 V Power consumption: Recording 5.7 W (SDR-H250)/4.4 W (SDR-H20) Signal system CCIR: 625 lines, 50 fields PAL colour signal SD card: Based on the SD-Video standard Recording format HDD: Independent standard SDR-H250:...
Page 110
LSQT1211(PAL_ENG).book 110 ページ 2007年2月13日 火曜日 午後1時14分 Others Video output level 1.0 Vp-p, 75 ™ Y: 1.0 Vp-p, 75 ™ S Video output level C: 0.3 Vp-p, 75 ™ Audio output level (Line) 316 mV, 600 ™ Card reader function (No copyright protection support) HDD reader function Hi-Speed USB (USB 2.0) compliant PictBridge-compliant...
Page 111
LSQT1211(PAL_ENG).book 111 ページ 2007年2月13日 火曜日 午後1時14分 Others Still pictures SD Memory Card: 8 MB/16 MB/32 MB/64 MB/128 MB/256 MB/512 MB/1 GB/2 GB (removable type) (FAT12 and FAT16 format corresponding) Recording media SDHC Memory Card: 4 GB (removable type) (FAT32 format corresponding) HDD: 30 GB* (fixed type) JPEG (Design rule for Camera File system, based on Exif 2.2 Compression standard), DPOF corresponding...