Panasonic SDR-H200PC Service Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Camcorder
  5. SDR-H200PC
  6. Service manual
Panasonic SDR-H200PC Service Manual

Panasonic SDR-H200PC Service Manual

Sd card/hard disk video camera
Hide thumbs Also See for SDR-H200PC:
Table of Contents

Advertisement

Quick Links

Download this manual
SD Card/Hard Disk Video Camera
Vol. 1
Colours
(S)...................Silver Type
© 2007 Panasonic Shikoku Electronics Co., Ltd. All
rights
reserved.
distribution is a violation of law.
ORDER NO. MKE0703302CE
B27
Unauthorized
copying
and

Advertisement

Table of Contents
loading

Related Manuals for Panasonic SDR-H200PC

Summary of Contents for Panasonic SDR-H200PC

  • Page 1 ORDER NO. MKE0703302CE SD Card/Hard Disk Video Camera Vol. 1 Colours (S)....Silver Type © 2007 Panasonic Shikoku Electronics Co., Ltd. All rights reserved. Unauthorized copying distribution is a violation of law.

  • Page 2: Table Of Contents

    SDR-H200P / SDR-H200PC CONTENTS Page Page 1 Safety Precautions 10 Troubleshooting 1.1. General Guidelines 11 Voltage Chart of Connectors on Sub P.C.B. and Main P.C.B. 2 Warning 2.1. Prevention of Electro Static Discharge (ESD) to 12 Block Diagrams Electrostatically Sensitive (ES) Devices 13 Schematic Diagrams 2.2.

  • Page 3: Safety Precautions

    SDR-H200P / SDR-H200PC 1 Safety Precautions 1.1. General Guidelines 1. IMPORTANT SAFETY NOTICE There are special components used in this equipment which are important for safety. These parts are marked by in the Schematic Diagrams, Circuit Board Layout, Exploded Views and Replacement Parts List. It is essential...

  • Page 4: Warning

    SDR-H200P / SDR-H200PC 2 Warning 2.1. Prevention of Electro Static Discharge (ESD) to Electrostatically Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor "chip"...

  • Page 5: How To Replace The Lithium Battery

    2. Unsolder the Lithium Battery “ML-621S/F9D” and then replace the new one. NOTE: This Lithium battery is a critical component. (Type No.: ML-621S/F9D Manufactured by Panasonic.) It must never be subjected to excessive heat or discharge. It must therefore only be fitted in equipment designed specifically for its use.

  • Page 6: Service Navigation

    SDR-H200P / SDR-H200PC 3 Service Navigation 3.1. Introduction This service manual contains technical information which will allow service personnel´s to understand and service this model. Please place orders using the parts list and not the drawing reference numbers. If the circuit is changed or modified, this information will be followed by supplement service manual to be filed with original service manual.

  • Page 7: Precautions For Handling Hdd

    SDR-H200P / SDR-H200PC 3.3. Precautions for Handling HDD 1. Handle HDD very carefully to prevent the static electricity and shock. 2. Set the HDD quickly after taking it out from the package. Make sure to put the HDD on buffer materials, etc.
  • Page 8 SDR-H200P / SDR-H200PC 3.3.2. Precautions for installing HDD...
  • Page 9 SDR-H200P / SDR-H200PC 3.3.3. Precautions for inserting and removing HDD FPC Make sure to use the tool (LSVQ0112) when locking and unlocking the lock lever of HDD FPC connector. Do not lock the lock lever without inserting HDD FPC. Otherwise, the connector may be damaged.
  • Page 10 SDR-H200P / SDR-H200PC Make sure to use the tool (LSVQ0112) when opening and closing the lock lever. *See "Disassembly Procedures" (Fig. D4) for attaching to the unit.

  • Page 11: Formatting Hdd

    SDR-H200P / SDR-H200PC 3.4. Formatting HDD When HDD is exchanged, format HDD as the procedure below. Without formatting, the error message appears on the LCD display when accessing HDD. <Formatting procedure> Rotate the mode dial to select Select [HDD] in [MEDIA SELECT].

  • Page 12: Specifications

    SDR-H200P / SDR-H200PC 4 Specifications...

  • Page 13: Service Mode

    SDR-H200P / SDR-H200PC 5 Service Mode 5.1. Error Display "PUSH THE RESET SWITCH" is displayed automatically on the LCD Monitor when an undesirable condition has occurred. Fig. 1 Note: When "PUSH THE RESET SWITCH" is displayed repeatedly, service is required. Check the Error Code which is listed in the Service Menu.
  • Page 14 SDR-H200P / SDR-H200PC Note: Only perform items 1, 2, 3, 4, 9, 10 and 14 in the Service Menu. To select the Item of Service Menu 1. Press [JOYSTICK CONTROL UP/DOWN] to select item [1], [2], [3], [4], [9], [10] or [14].
  • Page 15 SDR-H200P / SDR-H200PC Fig. 2-3...
  • Page 16 SDR-H200P / SDR-H200PC Fig. 2-4...
  • Page 17 SDR-H200P / SDR-H200PC Fig. 2-5...

  • Page 18: About Default Setting

    SDR-H200P / SDR-H200PC Fig. 2-6 To exit the Service Menu Unplug the AC Cord. 5.3. About Default Setting The data of Menu, Mode, Card and EEPROM setting, etc. is set to the default condition in factory. 5.3.1. How to set the Default Setting 1.

  • Page 19: Service Fixture & Tools

    SDR-H200P / SDR-H200PC 6 Service Fixture & Tools 6.1. Service Fixture and Tools...

  • Page 20: Service Position

    SDR-H200P / SDR-H200PC 6.2. Service Position 6.2.1. Extension Cables for Service Position Using the following Extension Cables, place the unit as shown for check and service. Note: 1. Use a grounded ESD wrist strap while disassembling the Lens portion. 2. Connect the F.P.C.s to the connectors, verifying the direction of F.P.C.s.
  • Page 21 SDR-H200P / SDR-H200PC...
  • Page 22 SDR-H200P / SDR-H200PC...

  • Page 23: Removal/Installation Of F.p.c. From Non Zif

    SDR-H200P / SDR-H200PC 6.3. Removal/Installation of F.P.C. 3. Connect the F.P.C.s to the Non ZIF connectors, verifying the direction of F.P.C as shown. From Non ZIF (Zero Insertion Force) Connector Removal/Installation of F.P.C. from the Non ZIF (Zero Insertion Force) connector: 1.

  • Page 24: Eeprom Data

    SDR-H200P / SDR-H200PC 6.4. EEPROM Data CAUTION: Be sure to save the EEPROM data using PC-EVR Adjustment Program before service and adjustment in order to make sure to avoid an accidental data loss, etc. using PC-EVR Adjustment Program by first.

  • Page 25: Special Note

    SDR-H200P / SDR-H200PC 6.5. Special Note All integrated circuits and many other semiconductor devices are electrostatically sensitive and therefore require the special handlings techniques described under "ELECTROSTATICALLY SENSITIVE (ES) DEVICES" section of this service manual. 6.6. Model No. Identification Mark Use Marks shown in the chart below to distinguish the different models included in this Service Manual.

  • Page 26: Disassembly And Assembly Instructions

    SDR-H200P / SDR-H200PC 7 Disassembly and Assembly Instructions 7.1. Disassembly Flow Chart This flow chart indicates the disassembly steps the cabinet parts and P.C.B.. Unit in order to access to be serviced. When reinstalling, perform the steps in the reverse order.

  • Page 27: Disassembly Procedures

    SDR-H200P / SDR-H200PC 7.3. Disassembly Procedures Flow-Chart for Disassembly Procedure Item/Part Fig. Removal (Screw,Connector,Flex. & Other) Rear Case Unit Fig. D2 Open the LCD Unit and Jack Cover. 7-Screws (A) 1-Connector FP11 Rear Case Unit Operation Unit Fig. D3 2-Screws (B)
  • Page 28 SDR-H200P / SDR-H200PC Fig. D1 Fig. D3 Fig. D2 Fig. D4...
  • Page 29 SDR-H200P / SDR-H200PC Note for replacing HDD 2) How to Attach · · · · Be sure to use the tool when inserting and removing Attach the HDD FPC to the new HDD using the tool. HDD FPC. Attach the HDD cushion to the HDD.
  • Page 30 SDR-H200P / SDR-H200PC Fig. D5 Fig. D7 Fig. D6 Fig. D8...
  • Page 31 SDR-H200P / SDR-H200PC Fig. D9 Fig. D11 Fig. D10 Fig. D12...
  • Page 32 SDR-H200P / SDR-H200PC Fig. D13...

  • Page 33: Measurements And Adjustments

    SDR-H200P / SDR-H200PC 8 Measurements and Adjustments 8.1. Electrical Adjustment 8.1.1. Initial Guideline The table below shows which adjustments are necessary according to the unit parts and individual parts to be replaced. Make sure to perform these adjustments shown below as necessary.
  • Page 34 SDR-H200P / SDR-H200PC 8.1.2. Installation of USB-SERIAL driver 5. When the communication is complete, the dialog will appear. Execute the "Setup.exe" file in "ComMass" folder by double Click "Yes" and "Save" to save the EEPROM data. clicking to install the USB-SERIAL driver.
  • Page 35 SDR-H200P / SDR-H200PC 8. To release the PC connection (COM) mode, push the 4. Confirm the OneNAND-Flash ROM Error information. [DELETE], [DVD COPY] and [JOYSTICK CONTROL UP] simultaneously for 3 seconds with the USB Cable disconnected. 8.1.5. How to confirm "OneNAND-Flash ROM Error"...

  • Page 36: Maintenance

    SDR-H200P / SDR-H200PC 9 Maintenance 9.1. Cleaning Lens and LCD Panel Do not touch the surface of the lens and LCD Panel with your hand. When cleaning the lens, use air-blower to blow off the dust. When cleaning the LCD Panel, dampen the lens cleaning paper with lens cleaner, and gently wipe the surface.

  • Page 37: Troubleshooting

    SDR-H200P / SDR-H200PC 10 Troubleshooting...
  • Page 38 SDR-H200P / SDR-H200PC...
  • Page 39 SDR-H200P / SDR-H200PC...
  • Page 40 SDR-H200P / SDR-H200PC...
  • Page 41 SDR-H200P / SDR-H200PC...
  • Page 42 SDR-H200P / SDR-H200PC...
  • Page 43 SDR-H200P / SDR-H200PC...
  • Page 44 SDR-H200P / SDR-H200PC...
  • Page 45 SDR-H200P / SDR-H200PC...
  • Page 46 SDR-H200P / SDR-H200PC...
  • Page 47 SDR-H200P / SDR-H200PC...

  • Page 48: Voltage Chart Of Connectors On Sub P.c.b. And Main P.c.b

    SDR-H200P / SDR-H200PC 11 Voltage Chart of Connectors on Sub P.C.B. and Main P.C.B.
  • Page 49 SDR-H200P / SDR-H200PC...
  • Page 50 SDR-H200P / SDR-H200PC...

  • Page 51: Block Diagrams

    SDR-H200P / SDR-H200PC 12 Block Diagrams OVERALL BLOCK DIAGRAM CAMERA P.C.B. MAIN P.C.B. IC6001 IC1001,ETC REAR UNIT AUTO FOCUS SW BATTERY MANUAL FOCUS SW +3.3V FP11 TERMINAL UNREG KEY DATA (1-3) POWER DISC ACCESS LED ON(L) +1.8V DC JACK LED DRIVE...
  • Page 52 SDR-H200P / SDR-H200PC...

  • Page 53: Schematic Diagrams

    SDR-H200P / SDR-H200PC 13 Schematic Diagrams 13.1. SCHEMATIC DIAGRAM & CIRCUIT BOARD LAYOUT NOTES 1. Important safety notice 3. Parts marked "PT" are not used in any models included in this service model. Components identified by the sign have special characteristics important for safety.

  • Page 54: Front Schematic Diagram

    SDR-H200P / SDR-H200PC 13.2. FRONT SCHEMATIC DIAGRAM NOTE: For placing a purchase order of the parts, NOTE: NOTE: FRONT SCHEMATIC DIAGRAM be sure to use the part number listed in the parts list. PARTS MARKED "PT" ARE NOT USED. FOR SCHEMATIC DIAGRAM AND CIRCUIT BOARD LAYOUT NOTES, Do not use the part number on this diagram.

  • Page 55: Lcd Backlight Schematic Diagram

    SDR-H200P / SDR-H200PC 13.3. LCD BACKLIGHT SCHEMATIC DIAGRAM NOTE: NOTE: For placing a purchase order of the parts, NOTE: NOTE: LCD BACKLIGHT SCHEMATIC DIAGRAM ALL INDIVIDUAL PARTS EXCEPT D8101, D8103, D8105, AND D8107 be sure to use the part number listed in the parts list.

  • Page 56: Hdd Relay Schematic Diagram

    SDR-H200P / SDR-H200PC 13.4. HDD RELAY SCHEMATIC DIAGRAM NOTE: For placing a purchase order of the parts, NOTE: NOTE: HDD RELAY SCHEMATIC DIAGRAM be sure to use the part number listed in the parts list. PARTS MARKED "PT" ARE NOT USED.

  • Page 57: Side R / Lcd Open Switch Schematic Diagram

    SDR-H200P / SDR-H200PC 13.5. SIDE R / LCD OPEN SWITCH SCHEMATIC DIAGRAM SIDE R OPEN SWITCH SCHEMATIC DIAGRAM IMPORTANT SAFETY NOTICE: NOTE: NOTE: NOTE: For placing a purchase order of the parts, COMPONENTS IDENTIFIED BY THE SIGN HAVE PARTS MARKED "PT" ARE NOT USED.

  • Page 58: Ccd Schematic Diagrams

    SDR-H200P / SDR-H200PC 13.6. CCD SCHEMATIC DIAGRAMS CCD SCHEMATIC DIAGRAM NOTE: CCD P.C.B. AND CCD FPC IS NOT SERVICEABLE AND IS "FOR REFERENCE ONLY" SUPPLIED AS A UNIT ONLY FOR REPLACEMENT CCD P.C.B. REC VIDEO SIGNAL IC202 R217 NC[H2] (TO CCD_FPC_R)

  • Page 59: Rear Case / Shaft Fpc / Hdd Relay Fpc Schematic Diagrams

    SDR-H200P / SDR-H200PC 13.7. REAR CASE / SHAFT FPC / HDD RELAY FPC SCHEMATIC DIAGRAMS NOTE: NOTE: NOTE: For placing a purchase order of the parts, PARTS MARKED "PT" ARE NOT USED. FOR SCHEMATIC DIAGRAM AND CIRCUIT BOARD LAYOUT NOTES, be sure to use the part number listed in the parts list.

  • Page 60: Side L / Operation / Top Operation Schematic

    SDR-H200P / SDR-H200PC 13.8. SIDE L / OPERATION / TOP OPERATION SCHEMATIC DIAGRAMS NOTE: For placing a purchase order of the parts, NOTE: NOTE: be sure to use the part number listed in the parts list. PARTS MARKED "PT" ARE NOT USED.

  • Page 61: Interconnection Schematic Diagram

    SDR-H200P / SDR-H200PC 13.9. INTERCONNECTION SCHEMATIC DIAGRAM NOTE: NOTE: INTERCONNECTION SCHEMATIC DIAGRAM NOTE: For placing a purchase order of the parts, PARTS MARKED "PT" ARE NOT USED. FOR SCHEMATIC DIAGRAM AND CIRCUIT BOARD LAYOUT NOTES, be sure to use the part number listed in the parts list.
  • Page 62 SDR-H200P / SDR-H200PC...

  • Page 63: Printed Circuit Board

    SDR-H200P / SDR-H200PC 14 Printed Circuit Board 14.1. FRONT P.C.B. FRONT P.C.B. LSEP8391B1 NOTE: NOTE: CIRCUIT BOARD LAYOUT SHOWS COMPONENTS INSTALLED FOR VARIOUS MODELS. FOR SCHEMATIC DIAGRAM AND CIRCUIT BOARD LAYOUT NOTES, FOR PROPER PARTS CONTENT FOR THE MODEL YOU ARE SERVICING, REFER TO BEGINNING OF SCHEMATIC SECTION.

  • Page 64: Hdd Relay P.c.b

    SDR-H200P / SDR-H200PC 14.2. HDD RELAY P.C.B. HDD RELAY P.C.B. LSEP8398A1 NOTE: NOTE: CIRCUIT BOARD LAYOUT SHOWS COMPONENTS INSTALLED FOR VARIOUS MODELS. FOR SCHEMATIC DIAGRAM AND CIRCUIT BOARD LAYOUT NOTES, FOR PROPER PARTS CONTENT FOR THE MODEL YOU ARE SERVICING, REFER TO BEGINNING OF SCHEMATIC SECTION.

  • Page 65: Lcd Backlight P.c.b

    SDR-H200P / SDR-H200PC 14.3. LCD BACKLIGHT P.C.B. LCD BACKLIGHT P.C.B. LSEP8367C1 NOTE: NOTE: FOR SCHEMATIC DIAGRAM AND CIRCUIT BOARD LAYOUT NOTES, ALL INDIVIDUAL PARTS EXCEPT D8102, D8104, D8107, D8109 AND D8111 REFER TO BEGINNING OF SCHEMATIC SECTION. ON LCD BACKLIGHT P.C.B. ARE SUPPLIED AS REPLACEMENT PARTS.

  • Page 66: Side R P.c.b

    SDR-H200P / SDR-H200PC 14.4. SIDE R P.C.B. SIDE R P.C.B. LSEP8392B1 IMPORTANT SAFETY NOTICE: NOTE: NOTE: COMPONENTS IDENTIFIED BY THE SIGN HAVE CIRCUIT BOARD LAYOUT SHOWS COMPONENTS INSTALLED FOR VARIOUS MODELS. FOR SCHEMATIC DIAGRAM AND CIRCUIT BOARD LAYOUT NOTES, SPECIAL CHARACTERISTICS IMPORTANT FOR SAFETY.

  • Page 67: Open Switch

    SDR-H200P / SDR-H200PC 14.5. OPEN SWITCH P.C.B. OPEN SWITCH P.C.B. LSEP8405A1 NOTE: NOTE: CIRCUIT BOARD LAYOUT SHOWS COMPONENTS INSTALLED FOR VARIOUS MODELS. FOR SCHEMATIC DIAGRAM AND CIRCUIT BOARD LAYOUT NOTES, FOR PROPER PARTS CONTENT FOR THE MODEL YOU ARE SERVICING, REFER TO BEGINNING OF SCHEMATIC SECTION.
  • Page 68 SDR-H200P / SDR-H200PC...

  • Page 69: Exploded View

    SDR-H200P / SDR-H200PC 15 Exploded View 15.1. MAIN PARTS SECTION...

  • Page 70: Front Hood And Front P.c.b. Section

    SDR-H200P / SDR-H200PC 15.2. FRONT HOOD AND FRONT P.C.B. SECTION...

  • Page 71: Side R Operation And Lcd Section

    SDR-H200P / SDR-H200PC 15.3. SIDE R OPERATION AND LCD SECTION...

  • Page 72: Ccd And Lens Section

    SDR-H200P / SDR-H200PC 15.4. CCD AND LENS SECTION...

  • Page 73: Packing Parts And Accessories Section

    SDR-H200P / SDR-H200PC 15.5. PACKING PARTS AND ACCESSORIES SECTION...

  • Page 74: Replacement Parts Lists

    6. Definition of Parts supplier: a. Parts with mark "SPC" in the Remarks column are supplied from Spare Parts Center of Panasonic AVC Company. b. Parts without mark in the Remarks column are supplied from PSEC. 7. Item numbers with capital letter E (Example: E10, E20,...) in the Ref.

  • Page 75: Mechanical Replacement Parts List

    Definition of Parts supplier: K1NA09E00063 SD UNIT LSEP8389A1 MAIN P.C.B. 1. Parts with mark "SPC" in the Remarks column are LSEP8390A1 CAMERA P.C.B. supplied from Spare Parts Center of Panasonic AVC LSEP8391B1 FRONT P.C.B. Company. LSEP8398A1 HDD RELAY P.C.B. LSEP8367C1 LIQUID...
  • Page 76 SDR-H200P / SDR-H200PC 16.3. ELECTRICAL REPLACEMENT Ref. Part No. Part Name & Description Remarks PARTS LIST Q6502 2SB1218AHL TRANSISTOR SI PNP CHIP B1ADCF000063 TRANSISTOR SI PNP CHIP Definition of Parts supplier: Q6502 B1ADCF000075 TRANSISTOR SI PNP CHIP 1. All parts are supplied from PSEC.
  • Page 77 SDR-H200P / SDR-H200PC Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks C6501 F3F0J106A032 TANTALUM CHIP 6.3V 10UF R8124 ERJ3RED270V MGF CHIP 1/16W 27 C6502 F1H1C104A041 C CHIP 16V 0.1UF R8126 ERJ3GEYJ104V MGF CHIP 1/16W 100K...
  • Page 78 SDR-H200P / SDR-H200PC CAPACITORS Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks R2537 ERJ3GEYJ101V MGF CHIP 1/16W 100 C6301 F3G0J107A017 TANTALUM CHIP 6.3V 100UF R2538 ERJ3GEYJ101V MGF CHIP 1/16W 100 C6302 F1H1C104A041 C CHIP 16V 0.1UF...

This manual is also suitable for:

Sdr-h200p

Table of Contents