Adjusting The Lcd Monitor/Finder - Panasonic NV-DS99EN Operating Instructions Manual

Adjusting the LCD Monitor/Finder
!&[VCR FUNCTIONS] ±mm5S[CAMERA FUNCTIONS]±mm±
[DISPLAYSETUP]?Km^^[LCD/EVFSET]{^aBa^K^^)
&M&[ON]i$ ■ rJ«^T?J5S °
[LCD BRIGHTNESS]
•
[LCD COLOUR LEVEL]
Rrm$H^E£$fta;i£ •
•
[EVF BRIGHTNESS]
nrawvf^fci&ttKg»<**WB^fe8S - ^niitnii
mmm
- hums •
1 ttpusH]9*aim}7mang(s»99ds
mm • *m*T-mm
•
2 a®[push]® o fi£$9i$®.
ffirau** •
- n&[rrEM](gi)ttm]is -
If you set [LCD/EVF SET] on the [DISPLAY SETUP] Sub-
Menu of the [VCR FUNCTIONS] or the [CAMERA
FUNCTIONS] Main-Menu to [ON], the following items are
displayed.
LCD Brightness (LCD BRIGHTNESS]
To adjust the brightness of the LCD screen. The Bar Indication
is divided into 8 steps. The more vertical bars are shown, the
brighter is the screen.
LCD Colour Level [LCD COLOUR LEVEL]
To adjust the colour saturation of the LCD screen. The Bar
Indication is divided into 8 steps. The more vertical bars are
shown, the stronger are the colours.
Finder Brightness [EVF BRIGHTNESS]
To adjust the brightness of the Finder. The Bar Indication is
divided into 8 steps. The more vertical bars are shown, the
brighter is the screen.
1 Press the [PUSH] Dial to select the item that
you want to adjust.
2
Turn the [PUSH] Dial. Turning It increases or
decreases the number of vertical bars of the
Bar Indication.
^[VCR FUNCTIONS]i^WS?[CAMERA FUNCTI0NS]£3£m±
[DISPLAY SETUP]T£Wlfl[LCD MODE] (
S&g^±[BRIGHT](K) •
If you use the Remote Controller for these adjustments, press
the [ITEM] Button to select the item, and then press the [SET]
Button to adjust it. Keeping the [SET] Button pressed changes
the number of bars.
Increasing the Brightness of the Whole LCD Monitor
Screen
Set [LCD MODE] on the [DISPLAY SETUP] Sub-Menu of the
[VCR FUNCTIONS] or the [CAMERA FUNCTIONS] Main-
Menu to [BRIGHT].
•These adjustments have no influence on the actually
recorded picture.
QQ