Panasonic SD/HDD SDR-H20 Operating Instructions Manual page 57

1
Set the AUTO/MANUAL/FOCUS
switch to MANUAL.
MNL
The icon shown in the illustration is displayed
automatically.
2
Move the joystick up to select
[ ].
MNL
3
Move the joystick left or right to
select the white balance mode.
MNL
[ ] Auto white balance adjustment
AWB
[ ] Indoor mode (for recording under
incandescent lamps)
≥ Incandescent lights, halogen lamps
[ ] Outdoor mode
≥ Outdoors under a clear sky
[ ] Manual adjustment mode
≥ Mercury-vapor lamps, sodium lamps,
some fluorescent lights
≥ Lights used for wedding receptions at
hotels, stage spotlights in theaters
≥ Sunrise, sunset, etc.
To restore to the automatic adjustment
Set the white balance mode to [
≥ You can also restore the automatic adjustment
by setting the AUTO/MANUAL/FOCUS switch
to AUTO.
3/3 NEXT 3/3 3/3 NEXT NEXT
3/3 NEXT 3/3 3/3 NEXT NEXT
BACK BACK BACK
].
AWB
To set the white balance manually
1
Select [ ], and fill the screen
with a white subject.
MNL
2
Move the joystick up to select
[ ].
MNL
When the [ ] display changes from flashing to
on, setting is complete.
≥ When the [ ] display continues flashing, the
white balance cannot be set because the place
is dark etc. In this case, use the automatic
white balance.
∫ About the white balance sensor A
The white balance sensor detects the type of
light source during recording.
Do not cover the white balance sensor during
recording, or it may not function properly.
∫ About the black balance
adjustment (SDR-H200)
This is one of the 3CCD system functions that
automatically adjusts the black when the white
balance is set in the manual adjustment mode.
When the black balance is adjusted, the screen
Recording
BACK BACK BACK
BACK
BACK BACK BACK
A
57
LSQT1190