Operating Environment - Panasonic SD/HDD SDR-H20 Operating Instructions Manual

With a computer

Operating environment

≥ A CD-ROM drive is necessary to install the supplied software.
≥ Even if the system requirements mentioned in these operating instructions are fulfilled, some
computers cannot be used.
≥ Use the supplied USB cable when connecting to the computer. (Operation is not guaranteed with any
other USB cables.)
∫ ImageMixer3 for Panasonic
OS
CPU
RAM
Screen resolution
Free hard disk
space
Disc drive
Interface
Languages
supported
≥ You cannot use a Panasonic DVD Video Camera as a device for writing.
≥ A drive that supports recordable discs is required to create a DVD-Video disc.
≥ Dual/double layer discs are not supported.
≥ For details about restricted items, read the [ReadMe] file in the [ReadMe] folder.
≥ This unit's USB terminal is read only. It cannot be used to write data to the unit from the computer.
∫ Using Built-in SD Drive
OS
CPU
RAM
≥ The USB equipment operates with the driver installed as standard in the OS.
94
LSQT1190
Mac OS X v10.3.9, v10.4.2 to v10.4.8
PowerPC G4 (1 GHz or higher), PowerPC G5, Intel Core Solo or higher
256 MB or more (512 MB or more recommended)
1024k768 pixels or more
Disk space required for installation: approx. 30 MB
Writeable DVD drive provided as a Macintosh standard feature
Hi-Speed USB (USB 2.0) — A type
English, French and Spanish
Mac OS X v10.3 to v10.4
PowerPC G3 (400 MHz or higher), G4, G5, Intel Core Duo, Intel Core Solo
64 MB or more