Panasonic SD/HDD SDR-H20 Operating Instructions Manual page 18

Before using
Using the lens cover (SDR-H200)
For the lens protection, be sure to close the lens
cover when not in use.
Rotate the lens cover open/close
ring.
Attaching the lens cap (SDR-H20/
SDR-H18)
Attach the lens cap to protect the surface of the
lens.
1
Pass the end of the lens cap cord
through the belt.
2
Pass the lens cap through the
loop.
3
To attach or remove the lens cap,
hold both sides of the lens cap
18
LSQT1190
with the tips of your finger and
thumb.
During recording
The removed lens cap can be attached to the
lens cap fixture.
Tripod receptacle
This is a hole for attaching the unit to the optional
tripod.
(Please carefully read the operating instructions
for how to attach the unit to the tripod.)
≥ When the tripod is used, the card slot cover
cannot be opened. Insert an SD card before
attaching this unit to the tripod. (l 29)