Xerox D110 Manual page 93

FMT_MSA.3(c) system administrator and is not
FMT_MSA.3(d) managed.
FMT_MSA.3(e)
FMT_MSA.3(f)
FMT_MSA.3(g)
FMT_MTD.1(a) - Management of data on Customer
Engineer Operation Restriction
- Management of data on Report
Print
FMT_MTD.1(b) none
Reason: The role group is fixed and
is not managed
FMT_SMF.1 -
FMT_SMR.1 none
Reason: The role group is fixed and
is not managed
FPT_STM.1 - Management of time and data.
FPT_TST.1 - Management of data on Self Test. a) management of the conditions
FTA_SSL.3 - Management of data on Auto
Clear.
FTP_ITC.1 - Management of data on Internal
Network Data Protection.
FPT_FDI_EXP.1 none
Reason: The role and transfer
Xerox D110/D125 Copier/Printer
- 87 –
セキュリティターゲット
b) managing the permissive or
restrictive setting of default
values for a given access control
SFP;
c) management of rules by which
security attributes inherit
specified values.
a) Managing the group of roles
that can interact with the TSF
data.
There are no management
activities foreseen.
a) Managing the group of users
that are part of a role.
a) management of the time.
under which TSF self testing
occurs, such as during initial
start-up, regular interval, or
under specified conditions;
b) management of the time
interval if appropriate.
a) specification of the time of
user inactivity after which
termination of the interactive
session occurs for an individual
user;
b) specification of the default
time of user inactivity after
which termination of the
interactive session occurs.
a) Configuring the actions that
require trusted channel, if
supported.
a) Definition of the role(s) that
are allowed to perform the

Copyright 2012 by Fuji Xerox Co., Ltd