Xerox D110 Manual page 92

Reason: there are no additional
security attributes and there are no
additional security attributes to be
managed.
FIA_SOS.1 none
Reason: The metric is fixed and is
not managed.
FIA_UAU.1 - Management of data on use of
password entered from MFD control
panel in user authentication.
- Management of data on key
operator, SA, and general user
( password)
- Management of data on user
authentication.
- Management of data on minimum
user password length
FIA_UAU.7 -
FIA_UID.2 - Management of data on key
operator, SA, and general user (ID)
- Management of data on user
authentication.
FIA_USB.1 none
Reason: action and security
attributes are fixed and are not
managed.
FMT_MOF.1 Management of data on Customer
Engineer Operation Restriction
FMT_MSA.1(a) none
FMT_MSA.1(b) Reason: The role group is fixed and
FMT_MSA.1(c) is not managed
FMT_MSA.1(d)
FMT_MSA.1(e)
FMT_MSA.1(f)
FMT_MSA.1(g)
FMT_MSA.3(a) none
FMT_MSA.3(b) Reason: The role group is only a
Xerox D110/D125 Copier/Printer
- 86 –
セキュリティターゲット
assignment, the authorized
administrator might be able to
define additional security
attributes for users.
a) the management of the metric
used to verify the secrets.
a) Management of the
authentication data by an
administrator;
b) Management of the
authentication data by the
associated user;
c) Managing the list of actions
that can be taken before the user
is authenticated.
There are no management
activities foreseen.
a) The management of the user
identities.
a) an authorized administrator
can define default subject
security attributes.
b) an authorized administrator
can change subject security
attributes.
a) Managing the group of roles
that can interact with the
functions in the TSF;
a) managing the group of roles
that can interact with the
security attributes;
b) management of rules by
which security attributes inherit
specified values.
a) managing the group of roles
that can specify initial values;

Copyright 2012 by Fuji Xerox Co., Ltd