Step 3: Install The Router; Remove Components - Juniper MX480 Quick Manual

Step 3: Install the Router

Remove Components

Copyright © 2015, Juniper Networks, Inc.
Because of the router's size and weight, you must remove all components before installing
the router. We also recommend that you install the router using a mechanical lift.
Remove Components on page 9
Install the Router Using a Lift on page 10
Install the Router Without a Mechanical Lift on page 12
Reinstall Components on page 13
Figure 4: Components to Remove from the Front of the MX480 Router
Figure 5: Components to Remove from the Rear of the MX480 Router
Before lifting the router, you must remove the following components:
Power supplies
Switch Control Boards (SCBs)
Step 3: Install the Router
9