MX480 3D Universal Edge Router Quick Start
Configure System Attributes
Commit the Configuration
24
Configure the name of the router. If the name includes spaces, enclose the name in
1.
quotation marks (" ").
[edit]
root@# set system host-name host-name
Configure the router's domain name.
2.
[edit]
root@# set system domain-name domain-name
Configure the IP address and prefix length for the router's Ethernet interface.
3.
[edit]
root@# set interfaces fxp0 unit 0 family inet address address/prefix-length
Configure the IP address of a backup router, which is used only while the routing
4.
protocol is not running.
[edit]
root@# set system backup-router address
Configure the IP address of a DNS server.
5.
[edit]
root@# set system name-server address
Optionally, display the configuration to verify that it is correct.
1.
[edit]
root@# show
system {
host-name host-name;
domain-name domain-name;
backup-router address;
root-authentication {
authentication-method (password | public-key);
}
name-server {
address;
}
}
interfaces {
fxp0 {
unit 0 {
family inet {
address address/prefix-length;
}
}
}
}
Commit the configuration to activate it on the router.
2.
Copyright © 2015, Juniper Networks, Inc.