Trouble Shooting - TANACOM BULL 750 Operating Manual

Trouble shooting

Symptom
The counter displays
Motor does not
Did not pull the lever to OFF
respond to the
position.
power lever
Unstable power source
Battery charge is low.
Cord worn or corroded
Counter display
does not appear.
Incorrect battery connection
Did not press
PICKUP / JIGGING BUTTON
Inverse counter
Inverse counter does not
does not appear
appear while winding up
automatically.
Power lever is at OFF
Jigging function
does not
respond
Pickup mode is selected
Low power voltage
The reel jigs on
You are using unstable
its own.
power on the boat.
Did not press
at surface
Auto stop
function does
not work Error for sinker weight or
rocking of the boat
Line is elongated.
There are
Line length has increased
counter errors.
due to stretching.
Pickup does not
Speed setting is at zero
respond.
Contact your dealer if the reel does not function properly despite the above details being con-
firmed, in the event of other problems arising, and to order parts.
Possible causes
0.0 m.
RESET BUTTON
To do
It is a normal function to avoid over
winding. Press RESET BUTTON
continue winding.
Pull the lever to OFF and then move
forward again to start winding.
Use another power source, such as
electric reel specific batteries.
Recharge the battery.
Replace the cord.
Connect correctly.
It is normal. Press
INVERSE COUNTER
Using the MODE BUTTON, turn the
inverse counter mode ON.
Push the lever forward.
With MODE BUTTON, select the
jigging mode
Replace with a recharged battery.
The power supply on the boat is unstable
and it may not function correctly.
Use a battery for electric reel.
Press RESET BUTTON
to zero with rig at the surface.
Adjust settings of auto stop function.
Reset the depth counter at the surface.
- Reset the counter.
- Revise the display.
- Re-enter line data.
Press MODE BUTTON
speed setting.
37
Ref.
page
to 21,22
BUTTON.
25-27
to reset depth
21,22
10-17
to select winding
9
2
3
5
2
24
28
25
3
2
20
20
20
32
23