Chumming Timer Winding - TANACOM BULL 750 Operating Manual

Functional setting operation

Chumming timer winding

The right timing for the best results. After a pre-determined amount of time (in minutes) has passed,
the reel starts winding automatically.
- After pre-set 5 minutes have passed, the reel automatically
winds up.
- When the timer is set, the timer indicator
display. To stop using the timer, set its time to zero.
- Pre-set time can be confirmed by pressing the
COUNTER BUTTON.
- Winding of the chumming timer functions when the depth
counter indicates between +20m and -20m. It will not function
any more if once the indication of the depth counter goes out of
this range.
1.
Press MODE BUTTON
display.(See page 18 – 19.)
is on the screen. The default setting is zero minutes or
.
The chumming timer helps ensure you check
baits at even intervals, a real help when
dropping multiple lines.
Use
2.
Use the power lever to set the number of minutes.
(Shown is the timer set to 3 minutes.)
(10. Chumming timer winding)
is shown in the
INVERSE
until you come to the timer setting
(In the case when the timer winding is
set to 5 minutes)
1
2
30
(timer setting display)