Display Recalibration - TANACOM BULL 750 Operating Manual

Functional setting operation
Display revision
You can recalibrate the counter should it not indicate an accurate depth compared to depth markings
on your line.
Example below is the case in which, though the counter shows
103 m, color markings on the line indicate 100 m.
1.
Press the MODE BUTTON
winding length. (See page 18 – 19.)
2
. Press MODE BUTTON
for 2 seconds.
This displays revision display.
3.
Move the power lever to change the displayʼs reading to 100.0.
(Occasionally, for the revision rate, the exact number cannot be
attained.)
4. After 100.0 is reached, then press the
return to depth display.
When you adjust the display, the inverse counter disappears, so
press the INVERSE COUNTER BUTTON
it, pressing of the RESET BUTTON
to the unrevised value.

(11. Display recalibration)

to display real fishing time and total
and RESET BUTTON at the same time
MODE BUTTON
one more time to use
changes the reading back
1
2
4
to
32
3
OFF
MAX