Line Sending Function - TANACOM BULL 750 Operating Manual

Functional setting operation

Line sending function

The spoolʼs motor assists in winding out the line.
- The line sending mechanism begins to work at a depth of 2.5 m
below the pre-set auto stop depth.
- When the clutch is on during line feeding, the motor runs, so be
careful that the spool is rotating to the winding direction.
- Speed of the line going out is adjusted with 32 speed levels
ranging between 0 and Hi. It is adjusted in the line sending
mode.
1.
Press the MODE BUTTON
adjustment display. Default setting is zero (OFF).
Set the speed level with the power lever.
2.
Press the MODE BUTTON
counter) to complete.
It shows
lamp blinks.
While the reel is sending line with this function, its speed cannot
be changed.
(4. Line sending function)
to show the line sending speed
three times to show 0.0
22
(adjustment of
line furnishing)
(depth
(the figure corresponds
to the case of setting to 5)
OFF