Chumming Timer Winding - TANACOM BULL 750 Operating Manual

Functional setting operation
3.
Press MODE BUTTON
- When the display goes back to depth counter, then the
procedure is completed.
- The indicator is seen on the display.
- The time set can be checked by pressing the
COUNTER BUTTON.
- Pressing and holding down the
back to the depth display.
4.
When the set time (in minutes) is reached, the reel begins to
wind at its maximum speed.
Chumming timer
This function provides a useful timer.
- This function displays the time passed after the presentation of
your bait or lure. It can be used for chumming, jigging timing or
reeling in your rig.
- The chumming timer starts from 7.0 m on the counter, unless a
specific fishing range has been entered into memory.
Display time is shown in seconds if remaining time is less than 60
seconds, in minutes if remaining time is more than a minute.
The outer frame expresses 10
seconds with each arch segment.
1. Pressing the
timer from
Attention

(10. Chumming timer winding)

twice.
INVERSE
MODE BUTTON scrolls quickly
INVERSE COUNTER BUTTON
0.0 .
3
Counter initially shows seconds, after 1minute,
indicates minutes.
while the timer is in operation re-starts the
31