How To Fix The Rod Clamp - TANACOM BULL 750 Operating Manual

Functional setting operation
When you use a metallic bat or for your fishing of a big charge, you should always utilize the Rod
Clamp.
(sing the Rod Clamp, it is possible to cramp rods with diameter up to 25-34mm)
1.
Insert the Bolt in the clamp setting hole, and fix it by tightening
the Nut and the Washer.
2
. Hold the rod in position while attaching the clamp.
Tighten the rod clamp nuts to secure.
To fix the reel with a rod clamp apply the screws to the reel foot
then place the rod between the threads then add the clamp and
tighten the nuts.
- If the Nut is tightened too firmly, there is a danger of deforming the rod depending upon
rod material, especially with composite rods and reel seats.
Attention

(12. How to fix the Rod Clamp)

1
2
33
Bolt
Washer
Tighten
Wrench
rod
Rod Clamp
Nut
Nut