Winding Speed Indicator - TANACOM BULL 750 Operating Manual

Functional setting operation
Winding speed display
In the default setting, the lower area counter displays the winding speed.
The chumming timer display area shows the remaining time until
the auto stop is reached. (p. 29)
The inverse counter numbers can be changed to indicate winding
speed.
Rate of speed indicated is meters per minute (m/min).
1.
Press MODE BUTTON
is shown on the screen.
In the default setting, the inverse counter is OFF.
(Unit: m/minute)
2.
Turn it ON with the power lever.
3.
You can complete the setting by pressing the
to display the next (line feed output setting) display.
4.
Press the MODE BUTON
setting display) to show the water depth on the display. At that
point, the depth counter always starts functioning.

(8. Winding speed indicator)

to show speed indicator display.
MODE BUTTON
3 times (from the line feed output
1
3
4
28
Example)
100 m/min
2