Sending The Same Document To Pre-Programmed Parties - Panasonic KX-FPC161 Operating Instructions Manual

Sending the same document to pre-programmed parties

1 Insert the document FACE DOWN.
If necessary, press
to select the desired resolution (p. 35).
2 Press .
Display:
3 Press or
displayed.
4 Press SET .
The document will be fed into the unit and
scanned into memory. The unit will then
transmit the data to each item, calling each
number sequentially.
After transmission, the stored document will
be erased automatically, and the unit will
automatically print a broadcast sending
report.
To send to selected parties only once
You can also select the parties for each transmission.
1. Follow steps 1 and 2 above.
2. Press or until the following is displayed.
Display:
3. Press to start programming the items you
SET
want to transmit.
4. Press or until the desired item you want to
transmit is displayed.
Example:
5. Press .
SET
Example:
To program other items, repeat steps 4 and 5
(up to 20 items).
6. Press to start transmission to the
SET
programmed items.
or repeatedly
DIRECTORY [+ -]
until the following is
<BROADCAST>
SEND:PRESS SET
<ONE1TIME1BROAD>
PRESS SET
DIR= [00]
NAVI.[+ -]A&ASET
Bill
6543210
DIR=Bill [01]
SEND:PRESS SET
Sending Faxes
Note:
If you select the "FINE", "SUPER FINE" or
"PHOTO" resolution, the number of pages
that the unit can transmit will decrease.
If the document exceeds the memory
capacity (p. 80), sending will be canceled.
If one of the items is busy or does not
answer, the item will be skipped. All skipped
items will be redialed up to 2 times after all of
the other items have been called.
To cancel the broadcast setting
1. Press STOP while the unit displays the
following.
Display:
The display will show the following.
2. Press .
SET
STOP
SET
BROADCASTING
SEND CANCELED?
YES:SET/NO:STOP
41