Receive Mode - Panasonic KX-FPC161 Operating Instructions Manual

Operations
Fax – receiving (cont.)
Problem
A white line or a dirty pattern
appears on your recording
paper.
The printing quality is poor.
I cannot receive documents by
FAX
pressing on the handset.
The other party complains that
they cannot send a document.

Receive mode

Problem
I cannot select the desired
receive mode.
The other party complains that
they cannot send a document.
68
The glass or rollers are dirty. Clean them (p. 74).
The other party sent a faint document. Ask them to send a
clearer copy of the document.
The thermal head is dirty. Clean it (p. 75).
Some paper has instructions recommending which side to
print on. Try turning the paper over.
You may have used paper with a cotton and/or fiber
content that is over 20%, such as letterhead or resume
paper. We recommend smooth paper such as Hammermill
Jet Print for clearer printing.
Press
The memory is full of received documents due to a lack of
recording paper or a recording paper jam. Install paper
(p. 15) or clear the jammed paper (p. 70).
If you want to set FAX ONLY or TEL/FAX mode:
— select the desired mode using feature #77 (p. 61), and
— press
the right of the display.
If you want to set TEL mode:
— press
the right of the display.
The unit is not in AUTO ANSWER mode. Press
AUTO ANSWER
the display.
For fax advantage assistance, call 1-800-435-7329.
Cause & solution
FAX
until a single beep is heard.
Cause & solution
AUTO ANSWER
to turn on the arrow ( ) on
Display:
AUTO ANSWER
to turn off the arrow ( ) on
to turn on the arrow ( ) on the right of
ON
ON
ON