Setting Your Logo - Panasonic KX-FPC161 Operating Instructions Manual

Setup (Base Unit)

Setting your logo

The logo can be your company, division or name.
MENU
1 Press .
Display:
2 Press or
displayed.
SET
3 Press .
4 Enter your logo, up to 30 characters, using
the dial keypad. See the next page for details.
Example: "Bill"
1. Press 2 2 times.
2. Press 4 6 times.
3. Press 5 6 times.
4. Press to move the cursor to the next
space and press
SET
5 Press .
The next feature will be displayed.
Press MENU .
6
18
SYSTEM SET UP
I H
PRESS NAVI.[
until the following is
YOUR LOGO
PRESS SET
LOGO=
AAAAAAAAA
Cursor
LOGO=B
LOGO=Bi
LOGO=Bil
6 times.
5
LOGO=Bill
YOUR FAX NO.
PRESS SET
For fax advantage assistance, call 1-800-435-7329.
HANDSET LOCATOR
(Insert)
]
FLASH MENU
(Hyphen)
Note:
You can enter your logo by pressing
(see the next page) in step 4. In this
case, press
To correct a mistake
Press or
incorrect character, and make the correction.
To delete a character
Move the cursor to the character you want to
delete and press
To insert a character
1. Press or
the position to the right of where you want to
insert the character.
2. Press HANDSET LOCATOR
insert a space and enter the character.
STOP
Display
(Delete)
SET
to move the cursor.
to move the cursor to the
(Delete).
STOP
to move the cursor to
(Insert) to
or