Ink Film - Installing / Replacing - Panasonic KX-FPC161 Operating Instructions Manual

Setup (Base Unit)
Ink film – installing /
Install the included ink film or replace the used ink film with new one.
The following ink films are available for replacement.
Model No. KX-FA53: Replacement film (1 roll)
Model No. KX-FA55: Replacement film (2 rolls)
Each roll prints about 150 letter-size pages. See page 8 for accessory information.
Open the front cover by pulling up the center
1
part.
If the handset is on the cradle, take it off
before opening the cover.
2 Push the back cover open button (green) on
the right side of the unit.
OR
Push the back cover open lever (green)
inside of the unit.
3 Open the back cover.
If you are installing the included ink film for
the first time, skip to step 6.
For replacement only
4
Pull out the blue gear and remove the used
ink film. Remove the used core.
12
replacing!
For fax advantage assistance, call 1-800-435-7329.
Center part
Front cover
Back cover
open lever (green)
Blue
gear
Back cover
open button
(green)
OR
Back cover
Used core
Used
ink film