Making A Copy; Copying Making A Copy - Panasonic KX-FPC161 Operating Instructions Manual

Copying
Making a copy!
The unit can make single or multiple copies (up to 50).
Adjust the width of the document guides to
1
the size of the document.
Insert the document (up to 10 pages) FACE
2
DOWN until a single beep is heard and the
unit grabs the document.
Display:
If necessary, press
to select the desired resolution (see below).
COPY
3 Press
If necessary, enter the number of copies
(up to 50).
START
Press
4
The unit will start copying.
Note:
Any transmittable document can be copied (p. 36).
To select the resolution
Select the desired resolution according to the type of
document.
– FINE: For printed or typewritten originals with small
printing.
– SUPER FINE: For originals with very small printing.
– PHOTO: For originals containing photographs, shaded
drawings, etc.
If you select "STANDARD", copying will be done using
"FINE" mode.
You can also select the resolution after pressing
COPY
in step 3.
1. Press 3 times.
Display:
2. Press or repeatedly to select the desired
resolution.
52
!!!STANDARD
PRESS NAVI.[+ -]
or repeatedly
.
NUMBER=1
COPY:PRESS START
NUMBER=1
OR PRESS NAVI.
.
STANDARD
<NUMBER>
Document guides
H
Quick scan feature
With this feature, the unit can scan the
document into memory before copying. This
feature is helpful when you want to remove the
document for other uses. To use this feature,
activate feature #34 on page 59 and make a
copy. After storing, the unit will print the
document.
If the document exceeds the memory
capacity (p. 80), copying will be canceled and
this feature will be turned off automatically.
To stop copying
STOP
Press
[+ -]
H
START
STOP
COPY
.