Storing Names And Telephone Numbers In The Directory - Panasonic KX-FPC161 Operating Instructions Manual

Navigator Directory (Base Unit)
Storing names and telephone numbers
in the directory!
For rapid access to frequently dialed numbers, the unit provides the navigator directory
(50 items).
For your convenience, the following item has been pre-programmed.
HELP-FAX (1-800-435-7329): If you cannot correct a problem after trying the help function
(p. 9), call using this item (p. 30).
If you do not need the above item, you can erase it (p. 29).
MENU
1 Press
displayed.
Display:
2 Press to select "NAVI.".
Enter the name, up to 10 characters (see
3
page 19 for instructions).
Example:
4 Press SET .
5 Enter the telephone number, up to 30 digits,
using the dial keypad.
Example:
If you want to enter a hyphen, press
.
FLASH
Press SET .
6
To program other items, repeat steps 3 to 6.
Press MENU
7
To correct a mistake
Press or to move the cursor to the incorrect
character/number, and make the correction.
28
until the following is
DIRECTORY SET
NAVI.= BROAD=#
NAME=
STORE:PRESS SET
NAME=Alice
STORE:PRESS SET
NO.=
NO.=5552233
REGISTERED
NAME=
STORE:PRESS SET
to exit the program.
MENU
FLASH
(Hyphen)
Helpful hint:
You can confirm the stored items on the
telephone number list (p. 76).
Note:
When the following is displayed in step 6,
you can store only 5 more items.
Display:
If there is no space to store new items, the
following is displayed in step 6.
Press STOP to exit the program.
To store new items, erase unnecessary items
(p. 29).
A hyphen or a space entered in a telephone
number counts as two digits.
To delete a character/number
Move the cursor to the character/number you
want to delete, and press
STOP
(Delete)
SET
REGISTERED
SPACE= 5 DIRS.
REGISTERED
DIRECTORY FULL
STOP .