Sending The Same Document To Pre-Programmed Parties - Panasonic KX-FHD331 Operating Instructions Manual

Sending Faxes
Sending the same document
to pre-programmed parties
{BROADCAST}
{<}{>}{+}{-}
{STOP}
1
Insert the document FACE DOWN.
L
If necessary, press
repeatedly to select the desired
resolution (page 43).
2
{ { { {
Press BROADCAST
L
You can also use the navigator key.
{ { { { < < < < } } } }
Press or
{ { { { - - - - } } } }
until the following is displayed, and
{ { { { } } } }
press .
SET
L
The document will be fed into the unit
and scanned into memory. The unit will
then transmit the data to each entry,
calling each number sequentially.
L
After transmission, the stored document
will be erased automatically, and the
unit will automatically print a broadcast
sending report.
Note:
L
If you select "FINE", "SUPER FINE" or
"PHOTO" resolution, the number of pages
that the unit can transmit will decrease.
L
If the document exceeds the memory
capacity, sending will be canceled.
L
If one of the entries is busy or does not
answer, it will be skipped. All skipped entries
will be redialed up to 2 times after all of the
other entries have been called.
50
{SET}
{ { { { + + + + } } } } { { { { - - - - } } } }
or
} } } }
.
{ { { { > > > > } } } } { { { { + + + + } } } }
, then press or
<BROADCAST>
SEND:PRESS SET
To send the same document to more than
one party only once
You can also select the parties for each
transmission.
1. Insert the document.
{ { { { > > > > } } } }
2. Press .
{ { { { + + + + } } } } { { { { - - - - } } } }
3. Press or
displayed.
{ { { { } } } }
4. Press SET to start programming the
entries you want to transmit to.
{ { { { + + + + } } } } { { { { - - - - } } } }
5. Press or until the desired entry you
want to transmit to is displayed.
Example:
{ { { { } } } }
6. Press SET .
Example:
L
To program other entries, repeat steps 5
and 6 (up to 20 entries).
{ { { { } } } }
7. Press SET to start transmission to the
programmed entries.
To cancel the broadcast setting
{ { { { } } } }
1. Press STOP while the unit displays the
following.
L
The display will show the following.
{ { { { } } } }
2. Press SET .
until the following is
<ONE TIME BROAD>
PRESS SET
DIR= [00]
NAVI.[+ -] & SET
Bill
6543210
DIR=Bill [01]
SEND:PRESS SET
BROADCASTING
SEND CANCELED?
YES:SET/NO:STOP