Sending The Same Document To Pre-Programmed Parties - Panasonic KX-FLB756 Operating Instructions Manual

Sending the same document to pre-programmed parties

1 Insert the document FACE DOWN into the
feeder.
G Confirm that there are no documents on
the scanner glass.
If necessary, press u
G
repeatedly to select the desired setting
(p. 31).
Press the desired a (1–2) or
2
HI.
G You can also use navigator key.
Press ( or ), then press + or -
until the desired key name is displayed, and
press i.
Example:
G The document will be fed into the unit and
scanned into memory. The unit will then
transmit the data to each entry, calling each
number sequentially.
G After transmission, the stored document will
be erased automatically, and the unit will
automatically print a broadcast sending
report.
To send the same document using the
scanner glass
Confirm that there are no documents in the auto
G
document feeder.
1. Open the document cover.
2. Place the document FACE DOWN, then close
the document cover.
3. Press the desired a (1–2) or
HI
.
To send a single page, skip to step 6.
G
To send multiple pages, go to next step.
G
4. Place the next page.
5. Press ê.
To send more pages, repeat steps 4 and 5.
G
6. Press i
<BROADCAST1>
EDIT:PRESS MENU
/
<BROADCAST1>
SEND:PRESS SET
.
Sending Faxes
BROADCAST
MANUAL BROAD
Note:
G Do not open the document cover when
sending a fax with the auto document feeder.
G If you select the "FINE", "SUPER FINE" or
"PHOTO" resolution, the number of pages
that the unit can transmit will decrease.
If the document exceeds the memory capacity
G
(p. 84), sending will be canceled.
If one of the entries is busy or does not
G
answer, it will be skipped. All skipped entries
will be redialed up to 2 times after all of the
other entries have been called.
To cancel the broadcast setting
1. Press { while the unit displays the
following.
Display:
The display will show the following.
G
2. Press w.
STOP
SCAN
RESOLUTION
FAX START
SET
@BROADCASTING
SEND CANCELED?
YES:SET/NO:STOP
39