Mechanical Disassemblies - Sanyo PLV-Z4 Service Manual

■ Mechanical disassemblies

Disassemble should be made following procedures in numerical order.
Following steps show the basic procedures, therefore unnecessary step may be ignored.
Caution:
The parts and screws should be placed exactly the same position as the original
otherwise it may cause lose of performance and product safety.
The wiring method of the leads and ferrite cores should be returned exactly the
same state as the original, otherwise it may cause lose of performance and prod-
uct safety.
1
Cabinet top ass'y removal.
1. Remove the 3 screws-A(M3x8) from the bottom side.
2. Remove the 2 screws-B(M3x8), remove the screw-C(T3x8), remove the screw-D(M3x6) and
remove the Cabinet top ass'y.
Cabinet top ass'y
A
- 14 -
Screws Expression
(Type
Diameter x Length
T type
Tapping screw
D
B
Fig. 1
A
A
) mm
M Type
Machine screw
C
B