Operation; Connections; Switching On - Cary Audio Design Cinema 11p Owner's Manual

OPERATION

OPERATION
Operating this component is a simple procedure. Each unit is designed for long term stability in
virtually any home operation situation. However, if the unit is operated outside the parameters
outlined in this owner's manual, damage may result. Please read this manual carefully before
putting your new component into operation.

CONNECTIONS

Balanced Inputs:
Single-ended Inputs:
Loudspeaker Binding Posts:

SWITCHING ON

POWER button:
POWER ON indicator:
STANDBY indicator:
BREAKING-IN
The Cinema 11p requires at least 100 hours of continuous operation after it is after it is first
turned on to sound its best. This gives the materials in various circuit components a chance to
"form" so audio signals achieve greater definition, smoothness and transparency.
Although the unit with sound spectacular when you first operate it, you will find it worthwhile to
listen again after a few days and you'll discover details in your music you may not have noticed
were there.
Accepts balanced signals from the surround sound processor
with balanced outputs.
Accepts single-ended inputs from the surround sound processor.
Connect + (positive) binding post on the Cinema 11p to the
positive inputs on the associated loudspeaker.
Connect – (negative) binding post on the Cinema 11p to the
negative inputs on associated loudspeaker.
Press once to turn the power "ON".
Press again to set to the "OFF" position and turn the power off.
The amplifier will enter into Standby and the blue LED will light.
The backlit etched Crystal 3D logo lights when the power
amplifier is turned ON.
The indicator lights when the power amplifier is switched to
standby mode.
7