Troubleshooting
Load Multipurpose Feeder with [paper size] [paper orientation]
Try one or more of the following:
•
Load the feeder with the correct size of paper.
•
From the control panel, touch one of the following:
–
Prompt each page, paper loaded or Do not prompt, paper loaded—To clear the message and
continue printing.
–
Automatically select paper—To use the paper loaded in the tray.
–
Reset active bin—To reset the active bin for a linked set of bins.
•
Cancel the print job.
Load Multipurpose Feeder with [paper type] [paper size] [paper orientation]
Try one or more of the following:
•
Load the feeder with the correct size and type of paper.
•
From the control panel, touch one of the following:
–
Prompt each page, paper loaded or Do not prompt, paper loaded—To clear the message and
continue printing.
–
Automatically select paper—To use the paper loaded in the tray.
–
Reset active bin—To reset the active bin for a linked set of bins.
•
Cancel the print job.
Load staples
Try one or more of the following:
•
Replace or insert the staple cartridge in the finisher.
For instructions on inserting or replacing a staple cartridge in the finisher, touch More information on
the printer control panel.
•
From the printer control panel, touch Continue to clear the message and continue printing.
•
From the printer control panel, touch Cancel job to cancel the print job.
Maintenance kit low [80.xy]
You may need to order a maintenance kit. For more information, contact technical support or your Dell printer
dealer.
If necessary, touch Continue to clear the message and continue printing.
Maintenance kit nearly low [80.xy]
For more information, contact technical support or your Dell printer dealer.
If necessary, touch Continue to clear the message and continue printing.
179