Dell S5830DN User Manual page 114

Understanding printer menus
Use
Timeouts
Hibernate Timeout
Disabled
1 hour
2 hours
3 hours
6 hours
1 day
2 days
3 days
1 week
2 weeks
1 month
Timeouts
Screen Timeout
15–300 sec
Timeouts
Print Timeout
Disabled
1–255 sec
Timeouts
Wait Timeout
Disabled
15–65535 sec
Timeouts
Job Hold Timeout
5–255 sec
To
Set the printer to operate at a low power state.
Notes:
•
When the Hibernate Timeout timer expires, the printer
uses Ethernet connection to check the value of
"Hibernate Timeout on Connection."
•
If "Hibernate Timeout on Connection" is set to "Do Not
Hibernate," then the printer never automatically
hibernates.
•
If "Hibernate Timeout on Connection" is set to
"Hibernate," then the printer follows the Hibernate
Timeout value, except when it is set to Disabled.
•
Disabled is the factory default setting except for
European Union countries, Canada, and Switzerland.
•
"3 days" is the factory default setting for European Union
countries, Canada, and Switzerland.
Set the amount of time in seconds the printer waits before
returning the display to a ready state.
Note: "30 sec" is the factory default setting.
Set the amount of time in seconds the printer waits to receive
an end‑of‑job message before canceling the remainder of the
print job.
Notes:
•
"90 sec" is the factory default setting.
•
When the timer expires, any partially printed page still in
the printer is printed, and then the printer checks to see
if any new print jobs are waiting.
•
Print Timeout is available only when using PCL
emulation. This setting has no effect on PostScript
emulation print jobs.
Set the amount of time in seconds the printer waits for
additional data before canceling a print job.
Notes:
•
"40 sec" is the factory default setting.
•
Wait Timeout is available only when the printer is using
PostScript emulation. This setting has no effect on PCL
emulation print jobs.
Set the amount of time the printer waits for user intervention
before it holds jobs that require unavailable resources and
continues to print other jobs in the print queue.
Notes:
•
"30 sec" is the factory default setting.
•
This menu appears only when a printer hard disk is
installed.
114