Load Manual Feeder With <Size; Load Manual Feeder With <Type> <Size; Load Staples; Reattach Bin <X - Dell 5230 User Manual

•
Cancel the print job. Press the up or down arrow button until
Load Manual Feeder with <size>
Try one or more of the following:
•
Load the multipurpose feeder with the correct paper size.
If there is no paper in the multipurpose feeder, then feed a sheet of paper to clear the message.
•
Ignore the request and print on paper that is already being used in one of the input sources. Press the up or down
arrow button until
If the printer finds a source that has paper of the correct type, it uses the paper from that source. If the printer
cannot find a source with the correct paper type, it prints on the paper that is installed in the default paper source.
•
Cancel the print job. Press the up or down arrow button until
Load Manual Feeder with <type> <size>
Try one or more of the following:
•
Load the correct paper type and size in the multipurpose feeder.
•
Ignore the request and print on paper that is already being used in one of the input sources. Press the up or down
arrow button until
correctly.
If the printer finds a source that has paper of the correct type, it uses the paper from that source. If the printer
cannot find a source with the correct paper type, it prints on the paper that is installed in the default paper source.
•
Cancel the print job. Press the up or down arrow button until

Load staples

Try one or more of the following:
•
Replace the specified staple cartridge in the finisher.
•
Press the up or down arrow button until
continue printing.
•
Cancel the print job. Press the up or down arrow button until
Reattach bin <x>
Try one or more of the following:
•
Turn the printer off and then back on.
If the error occurs a second time:
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Remove the specified bin.
4
Reattach the bin.
Automatically select appears, and then press
Automatically select appears, and then press
Continue appears, and then press
Troubleshooting
Cancel job appears, and then press
Cancel job appears, and then press
Cancel job appears, and then press
Cancel job appears, and then press
160
.
. The current job may not print
to clear the message and
.
.
.
.